Using Software Distributor Tools - HP -UX 11i Installation And Update Manual

Updating or
recovering SD
tools
Managing
software depots
Updating Applications

Using Software Distributor Tools

Using Software Distributor Tools
The latest version of Software Distributor (SD) tools are installed when
you cold-install or use the update-ux command to update your OS, as
explained in Chapter 2. If, after updating the OS, you find that an SD
tool is missing or out-of-date, you need to update the entire SD toolset to
the latest version from HP-UX 11i media.
Updating SD is easily accomplished using the install-sd command. See
"Re-installing SD" in Appendix B for details.
After updating your depot-management server to HP-UX 11i, you can
manage HP-UX 10.20, 11.00 and 11i software on the same system. This
is the preferred depot-management solution. If your depot-management
server is running HP-UX 11.0, however, it can handle 10.20 and 11.0
depots but not HP-UX 11i depots.
For help setting up and using a depot-management server, see Chapter 4
in the Software Distributor Administration Guide, available on the
Instant Information CD and on the Web:
docs.hp.com/hpux/os/11i/
82 Chapter 4