HP -UX 11i Installation And Update Manual page 59

NOTE
NOTE
Do not use patch_match_target with update-ux when updating
applications. Instead, use update-ux -i to invoke swinstall's interactive
mode, where you can specify match_target or patch_match_target to
update existing applications and/or patches.
• Update using interactive software selection:
To interactively select software for an update, use the -i option. For
example:
/usr/sbin/update-ux -s /cdrom -i
For each CD, update-ux displays swinstall's interactive user interface
with software already selected to match the default update. Now you
can change software selections, for example, selecting as non-default
network driver or a Web browser, before performing the update. Since
update-ux selects OS, networking, language and diagnostic bundles
by default, the interactive user interface provides a way to de-select
the default software and use a pure match_target instead. Due to the
problems explained above, using a pure match_target is not
recommended.
Do not combine -i and -x options in the same update-ux command.
When the -i option is specified, swinstall's interactive user interface
is active only when swinstall is running to load software from each
source location. When installing from HP-UX 11i CDs, you will have
to select non-default software twice; once for each CD. If you do set
swinstall options like match_target, be sure to re-select those options
in the second swinstall session.
For help using swinstall's interactive mode, see the swinstall(1M)
manpage or the Software Distributor Administration Guide.
• Update with selectable software such as an Ignite-UX server:
To update to HP-UX 11i and include additional software such as
Ignite-UX, enter:
/usr/sbin/update-ux -s /cdrom B5725AA
Chapter 2
Migrating to HP-UX 11i
Updating HP-UX 10.20/11.0 to 11i
59