HP -UX 11i Installation And Update Manual page 69

Step 9. Repeat Step 8 until all nodes have been updated to HP-UX 11i.
Replacing
MC/ServiceGuard
with ServiceGuard
OPS Edition
/usr/sbin/update-ux -s /cdrom -i HPUX11i-OE-MC
Then restart the upgraded system in the cluster.
If you plan to install the HP-UX 11i Mission Critical OE, but will require
the ServiceGuard OPS (Oracle Parallel Server) Edition in place of
MC/ServiceGuard, follow the appropriate procedure here. Both products
cannot co-exist on the same system:
If you now have or will have the ServiceGuard OPS (Oracle Parallel
Server) Edition:
• If you already have ServiceGuard OPS Edition on the system:
1. Halt the ServiceGuard OPS cluster.
2. Update to HP-UX 11i Mission Critical OE using the -i option:
/usr/sbin/update-ux -s /cdrom -i HPUX11i-OE-MC
3. In the swinstall user interface, de-select these MC/ServiceGuard
and Event Monitoring System (EMS) filesets:
ServiceGuard
Cluster-Monitor
Package-Manager
CM-Provider-MOF
ATS-CORE
EMS
ServiceGuard OPS Edition remains unchanged after the update,
but may require updating. See the manual listed in step 3 below.
• If you plan to install ServiceGuard OPS Edition after installing the
HP-UX 11i Mission Critical OE, follow these steps:
1. Install the Mission Critical OE, using either the cold-install or
update process explained earlier in this chapter.
2. Use the swremove command to remove the MC/ServiceGuard and
Event Monitoring System filesets listed above from the Mission
Critical OE.
3. Install ServiceGuard OPS Edition as explained in the Configuring
OPS Clusters with ServiceGuard OPS Edition manual, available
on the Web: docs.hp.com/
Chapter 2
Migrating to HP-UX 11i
Installing ServiceGuard Products
69