HP -UX 11i Installation And Update Manual page 43

Step 9. Whether using
IMPORTANT
From the
User Interface and Media Options
•
Source Location Options: Media-only installation
•
User Interface Options: Guided Installation
with limited choices. Select if you are not familiar with Ignite-UX.
Alternately, select
enabling you to customize your system. Use this mode to change LVM
settings and set system parameters, network services, file-system
characteristics, and other configuration details. Minimum file-system
requirement are listed on page 40.
You can exit
Guided Installation
Advanced Installation
or pressing . Make your choices and select
C
Guided Installation
through each screen to configure your system:
• : Lists the OS version (initially B.11.11).
Configurations
• : Specify desired OE from those available on the CD. If
Environments
your system is 32/64-bit capable, select the bundle for the OS
word-width you wish to install, 32 or 64 (see the table at the back of
this chapter).
• Click the
Languages:
bundles to be loaded.
workstations, resulting in all available CDE-language bundles being
installed.
Global (Non-CDE)
indicate that a generic, CDE-language bundle will be installed.
•
Additional Software:
other applications are selected for your system (see the table at the
back of this chapter).
Do not de-select the HPUXBaseAux, HWEnable11i, OnlineDiag
and/or BUNDLE11i bundles (BUNDLE11i is not needed with the
Technical Computing or Minimal Technical OEs). If in doubt, leave the
selections as default. Other software products may be selectable,
however, we recommend that you do not de-select any products at this
time. For more about OnlineDiag, see "Verifying and Adding Diagnostics"
Chapter 2
screen, choose:
Advanced Installation
and restart the configuration using
at any time by either selecting the
or
Advanced Installation
. button to view CDE-languages
Languages..
is set by default when installing on
Global
is set when installing on servers to
Ensure that the needed networking driver(s) and
Migrating to HP-UX 11i
Cold-installing HP-UX 11i
— provides an install wizard
to see tabbed screens,
Cancel
.
OK
, proceed
button
43