Updating Licensepower/Ifor - HP -UX 11i Installation And Update Manual

Converting the
database
IMPORTANT
Un-installing iFOR
version 4

Updating LicensePower/iFOR

HP plans to remove LicensePower/iFOR from HP-UX in a future release.
To download the latest version of or patches for LicensePower/iFOR, go
to Isogon's Web site:
www.isogon.com/support/sptlpifor/sptlpifor.htm
When upgrading to the LicensePower/iFOR version 4.0 license server,
any existing version 3.0.x databases must be converted to version 4.0.
This will ensure that existing licenses are made available in the new
database (for other changes, see the readme file installed with 4.0).
After installing version 4.0, perform this conversion:
1. Reconfigure the license server using the i4config from version 4.0.
2. Start the license server and run the i4tv verification utility to make
sure the installation was successful.
3. Stop the license server.
4. Make sure the /var/opt/ifor is your current directory and that
/opt/ifor/ls/bin is in your PATH.
5. Enter: v3tov4
This command completes without displaying messages.
6. Start the license server back up and run: i4admin. Licenses from the
version 3.0.x database are now in the version 4.0 database.
Do not remove transition links while you are using this product.
iFOR version 4 requires converting licenses from the previous version to
a new format. If you un-install version 4 and then reinstall version 3.0.x,
you will not be able to use the new version 4 database. You can restore
the copies of the version 3.0.x database files that were saved with the
"V3" extension in the /var/opt/ifor directory. This can be done by
renaming these files and removing the "V3" extension. Doing this,
however, will lose any licenses that were added when version 4 was
installed.
Chapter 4
Updating Applications
Updating LicensePower/iFOR
83