HP -UX 11i Installation And Update Manual page 90

Older workstation
search results
Step 1. Check the hardware.
Step 2. To initiate another search, enter: s
Step 3. At the prompt Enter boot selection, enter the P n device selection for
Booting HP 9000 Systems
Booting Workstations
s) Search for bootable devices
a) Enter Boot Administration mode
x) Exit and continue boot sequence
?) Help
Select from menu:
To start a search for bootable devices, enter: s
==============================================================
===========
Searching for Devices with Bootable Media.
To terminate search, press and hold the ESCAPE key.
Device Selection
Utilities
P0
P1
P2
XM-3301TA
Enter boot selection, (h)elp, or e(x)it:
==============================================================
===============
You will see a list of P n selections, as shown above.
If your boot device does not appear in the search list:
To exit, enter: x
the device containing your install media.
If you know the SCSI address of the device beforehand, you can skip the
search and simply enter this at the Select from menu prompt:
b scsi. x
After choosing the boot path and loading the Ignite-UX utility, the
Ignite-UX keyboard languages screen appears (if your system has a
PC-style keyboard). From this point on, respond to the requests for
information on this and successive screens.
90
Device Path
scsi.6.0
scsi.3.0
scsi.0.0
Device Type and
HP 2213A
IPL
HP HP35480A
IPL
TOSHIBA CD-ROM
IPL
Appendix A