HP -UX 11i Installation And Update Manual page 93

Step 5. To the question Interact with IPL (y or n)?, enter: n
TIP
device, respond with: y
• If neither the primary or alternate device paths correspond to that for
the CD device, respond with n to both prompts. In this case, enter the
hardware path of the device (for example, 52.3.0) at the prompt:
Enter boot path, command, or ?>
To start over at this point, simply switch the system OFF and ON again.
After choosing the boot path and loading Ignite-UX, the Ignite-UX
keyboard languages screen appears (if your system has a PC-style
keyboard). Respond to the requests for information on this and the
following screens. Loading the install kernel takes 3 to 5 minutes.
Appendix A
Booting HP 9000 Systems
Booting HP 9000 Servers
93