Electrical Specifications; Hardware Documentation Updates - Sun Microsystems SPARC Enterprise M5000 Product Notes

Electrical Specifications

The following changes belong in the Sun SPARC Enterprise M4000/M5000 Servers Site
Planning Guide and the Sun SPARC Enterprise M4000/M5000 Servers Service Manual.
Midrange Servers Electrical Specifications
FIGURE 8
Volt Ampere
Maximum current
Heat dissipation
Input voltage
Plug type

Hardware Documentation Updates

This section contains late-breaking hardware information that became known after
the documentation set was published.
TABLE 6
Hardware Documentation Updates
TABLE 6
Title
All SPARC Enterprise
M4000/M5000 servers
documentation
SPARC Enterprise M4000
2,058 VA
24.0A at 100–127 VAC (12A/cord)
12.0A at 200–240 VAC (12A/cord)
6,879 BTUs/hr (7,258 kJ/hr)
100–127 VAC
200–240 VAC
IEC 60320 C20
IEC 60309 16A 250V (All other
locations except Japan, Korea, and
Taiwan)
NEMA L5-15 125V 15A (Americas
and Taiwan)
NEMA L6-20 250V 20A (Americas,
Japan, Korea, and Taiwan)
lists known documentation updates.
Page Number Update
All DVD references are now referred to as CD-RW/DVD-RW.
Sun SPARC Enterprise M4000/M5000 Servers Product Notes
SPARC Enterprise M5000
3,815 VA
48A at 100–127 VAC (12A/cord)
24A at 200–240 VAC (12A/cord)
12,754 BTUs/hr (13,457 kJ/hr)
100–127 VAC
200–240 VAC
IEC 60320 C20
IEC 60309 16A 250V (All other
locations except Japan, Korea, Taiwan)
NEMA L5-15 125V 15A (Americas and
Taiwan)
NEMA L6-20 250V 20A, Americas,
Japan, Korea, and Taiwan)
15