Software Documentation Updates - Sun Microsystems SPARC Enterprise M5000 Product Notes

Software Documentation Updates

This section contains late-breaking information on the software documentation that
became known after the documentation set was published.
Software Documentation Updates
TABLE 9
Document
All Sun SPARC Enterprise
M4000/M5000/M8000/
M9000 servers
documentation
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers XSCF User's Guide
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers XSCF User's Guide
30 Sun SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 • November 2007
Page Number Change
All DVD references are now referred to as CD-RW/DVD-
RW.
Page 9-5 The list of web browsers supported by the XSCF Web
include:
• Microsoft Internet Explorer 6.0 or later
• Firefox 2.0 or later
• Mozilla 1.7 or later
• Netscape Navigator 7.1 or later
Page 2-2 Setup Summary by the XSCF Shell section. Add the
following Note:
Note: In addition to the standard default login, Sun SPARC
Enterprise M4000/M5000/M8000/M9000 servers are
delivered with a temporary login called admin to enable
remote initial login, through a serial port. Its privileges are
fixed to useradmin and cannot be changed. You cannot log in
as temporary admin using the standard UNIX user name
and password authentication or SSH public key
authentication. It has no password, and one cannot be added
for it.
The temporary admin account is disabled after someone logs
in as the default user, or after someone logged in as
temporary admin has successfully added the first user with
valid password and privileges.
If, before the default login is used, you cannot log in as
temporary admin, you can determine if someone else has
done so by executing the following command:
showuser -l