Software Documentation Updates (Continued)
TABLE 9
Document
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers XSCF User's Guide
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers Administration Guide
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers Administration Guide
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers Administration Guide
Page Number
Change
Page D-5
Frequently Asked Questions (FAQ) in "Troubleshooting
XSCF and FAQ"
The option for OS dump is not "request" but "panic".
Correction:
1. First, execute the reset(8) command with the panic
option from the XSCF Shell.
Page 2
Solaris OS Software section. The following Note has been
added:
Note: The XSCF firmware requires that all domains have the
SUNWsckmr and SUNWsckmu.u packages. Since the Core
System, Reduced Network, and Minimal System versions of
the Solaris OS do not automatically install these packages,
you must do so on any domains that do not already have
them.
Page 8
Logging in to the System section. Add the following Note:
Note: In addition to the standard default login, Sun SPARC
Enterprise M4000/M5000/M8000/M9000 servers are
delivered with a temporary login called admin to enable
remote initial login, through a serial port. Its privileges are
fixed to useradmin and cannot be changed. You cannot log in
as temporary admin using the standard UNIX user name
and password authentication or SSH public key
authentication. It has no password, and one cannot be added
for it.
The temporary admin account is disabled after someone logs
in as the default user, or after someone logged in as
temporary admin has successfully added the first user with
valid password and privileges.
If, before the default login is used, you cannot log in as
temporary admin, you can determine if someone else has
done so by executing the following command:
showuser -l
Page 66
Audit Configuration, add Note at the end of Audit File
Tools:
Note: This chapter describes how to set up archived log files.
The SP Security (SUNWspec) Package gives administrators
and service providers a means to view those files. To display
the XSCF audit log files archived to your server, use the
viewauditapp(8) and mergeaudit(8) off-platform audit
file viewers.
Sun SPARC Enterprise M4000/M5000 Servers Product Notes
31
Need help?
Do you have a question about the SPARC Enterprise M5000 and is the answer not in the manual?