Booting From A Wan Boot Server; Abbreviated Man Page For Getflashimage - Sun Microsystems SPARC Enterprise M5000 Product Notes

The entry for column 4 perm mem MB indicates the presence of permanent memory
if the value is non-zero.
The example shows permanent memory on 00-2, with 1674 MB.
If the board includes permanent memory and executes the deleteboard command
or moveboard command, the following notification is displayed:
System may be temporarily suspended, proceed?

Booting From a WAN Boot Server

To support booting the Sun SPARC Enterprise M4000/M5000 server from a WAN
boot server:
1. Install the Solaris 10 11/06 OS on the WAN boot server.
2. Copy the wanboot executable from that release to the appropriate location on the
install server. If you need further instructions, refer to the Solaris 10 Installation
Guide: Network-Based Installations or refer to:
http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh65?a=view
3. Create a WAN boot miniroot from the Solaris 10 11/06 OS. If you need further
instructions, refer to:
http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh63?a=view
If you do not upgrade the wanboot executable, the Sun SPARC Enterprise
M4000/M5000 server will panic, with messages similar to the following:
krtld: load_exec: fail to expand cpu/$CPU
krtld: error during initial load/link phase
panic - boot: exitto64 returned from client program
See
http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh5i?a=view
more information on WAN boot.

Abbreviated Man Page for getflashimage

In XCP 105x, the command getflashimage is available, which can be used to
download firmware images in place of the XSCF Web.
Sun SPARC Enterprise M4000/M5000 Servers Product Notes
[y|n]:
for
29