Solaris Patch Information; Installing The Solaris Patches - Sun Microsystems SPARC Enterprise M5000 Product Notes

Note – All Sun SPARC Enterprise M4000/M5000 servers must be upgraded to XCP
1050 or later in order to support adding future Capacity On Demand (COD) Right To
Use (RTU) licenses. Contact your local Service Representative for assistance.
If you plan to boot your Sun SPARC Enterprise M4000/M5000 server from a Solaris
WAN boot server on the network, you must upgrade the wanboot executable. See
"Booting From a WAN Boot Server" on page 29 for details.
Note – For the latest information on supported firmware and software versions, see
"Software Resources" on page vii.

Solaris Patch Information

The following patches are mandatory for Sun SPARC Enterprise M4000/M5000
servers running Solaris 10 11/06 OS. These patches are not required for servers
running Solaris 10 8/07 OS.
Note – The patches include a revision level, shown as a two-digit suffix. Check
for the latest patch revision. See "Software Resources" on
SunSolve.Sun.COM
page vii for information on how to find the latest patches.

Installing the Solaris Patches

●
Install the following patches in numerical order:
1. 118833-xx (minimum revision -36. Reboot your domain before proceeding.)
2. 125100-xx (minimum revision -10)
See the patch README file for a list of other patch requirements.
3. 123839-xx (minimum revision -07)
4. 120068-xx (minimum revision -03)
5. 125424-xx (minimum revision -01)
6. 118918-xx (minimum revision -24)
2 Sun SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 • November 2007