Table of Contents
Advertisement
Selecting IORSF
6.5 Examples of standard processing in SVP mode
6.5.1 Selecting IORSF
The steps listed below are conditions for the loading of a particular IORSF at the next IMPL
or the next time the system is switched on.
In the following example the IORSF is selected with Level 2.
Conditions
You must have selected the "SVPST0 #1 (computer name)" window, created a link to the
$KVPHV0, and entered the correct password.
The MODE SELECTION FRAME is displayed:
FUNCTION=>
- EXECUTION -
*1 CPU STOP
*2 INTERRUPT
*3 TOD ENABLE
*4 SYSTEM RESET
*5 SYSTEM RESET CLEAR
*6 STORE STATUS
*7 RESTART
RA
Figure 45: MODE SELECTION FRAME screen
82
----- MODE SELECTION FRAME -----
- SELECTION -
*LD PROGRAM LOAD
*ST STATUS DISPLAY
*MA MANUAL OPERATION
*AD ALTER/DISPLAY
*ME MESSAGE
*CH CH/SUBCH STATUS
*AU AUXILIARY
*MF MSF
*PA PERFORMANCE ANALYZER
CL-0
CPU-0 CHP-0
M
Standard processing in SVP mode
E40L01G
CPU SELECT=>
- 0
-
STOP/START MODE=>
*1 ALL CPU
>2 TARGET CPU
RUN
M
FLAG CODE = D90557 W 00000V00
[]-[]00
U41161-J-Z126-1-76
Advertisement
Table of Contents
