Maps Screen - Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

Alarms
Touch ALARMS
to view all ACTIVE
and INACTIVE engine
alarms.
Debug Assist
Touch DEBUG
ASSIST to access
controls for TRAINED
SERVICE TECHS
ONLY.
Stereo SXM Reset
Touch STEREO
SXM RESET to restore
stereo factory default
settings. Set the
mode to SXM before
proceeding.
Cruise Option
Touch 3-EVENT
CRUISE to enable/
disable the Cruise
Control Option.
Time Zone
Touch TIME ZONE
to select the time zone.
2019 Malibu Boats, LLC Owner's Manual • Page 82
https://www.boat-manuals.com/

Maps Screen

The Navionics
Navigation System
uses GPS (Global
Positioning System)
satellites, and a map
database to calculate
and display route
directions. SD Card
with Map Data is required. The MAP button shows actual current
bearing from the GPS. ".." is displayed if the data is not available.
When a Navionics SD card is loaded into the ViperII SD Slot,
map data for the region will appear as a bunch of purple boxes on
the map. If the purple squares do not appear on the map, the card is
missing, not installed correctly, or possibly defective.
Navigation
Controls
Touch ANYWHERE
on the map to
activate the pop-up
controls. Touch the
SIX DIRECTIONAL
ARROW buttons along
the perimeter or the map window to position the cursor. Touch the
RETURN button to return the cursor to the CURRENT LOCATION
and the +/- buttons to ZOOM In/OUT.
Bearing
Touch the NORTH/
BEARING/COMPASS
button to change the
method of TRACKING
position.
NORTH is always
at the top when
NORTH is selected. The BEARING is always pointing to the top of
the screen and in the direction the boat is traveling when BEARING
is selected.
Compass
A COMPASS
replaces the map
when COMPASS is
selected.
Touch the GPS
button to view
available SATELLITE
STATUS. It can take