Table of Contents
Advertisement
Wakesetter
Command Center
The Malibu dash features two video screens through which most of
the functionality of the boat operation is controlled. On the lower left
is standard storage or an optional Sport Dash (shown). It is explained
in further detail in the How It Works section of this owner's manual.
Engine Start Code
The driver will be prompted to enter an ENGINE START CODE
on the 7" display each time the power button is pressed ON or the
ignition key is cycled.
To change the start code, touch CHANGE and enter the current
code followed by the new code.
To disable the prompt, touch the DISABLE and enter the current
code. To RE-ENABLE the start code prompt, go into the settings menu
and select SHOW ENGINE CODE. From that menu,select SHOW.
NOTICE: Upon entry of the correct code, or ignition
if code prompt is disabled, the blower will turn on for
four (4) minutes in preparation for engine starting.
2019 Malibu Boats, LLC Owner's Manual • Page 62
https://www.boat-manuals.com/
Text/Phone Alert
A pop-up alert signals a new incoming text message or
phone call.
System Overview
The system architecture combines an industry leading 12.3" and a
7" LCD placing the most commonly used controls and information on
the top surface. Critical information is always in view and the center
of the 12.3" screen swaps out with a touch of a button.
1 - Current Water depth
2 - Engine Hours
3 - 8-Point Compass Heading
4 - Go Home Mode Button
5 - Night Mode Button
6 - Speed Input
7- Engine Temperature Gauge
8 - Oil Pressure Gauge
9 - Viper II Clock/Blue Tooth/Audio Info
10 - Voltage Gauge
11 - Save Button
12 - Fuel Gauge
13 - Dock Mode Button
Advertisement
Table of Contents
