Power Wedge Control - Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

Surf Gate Operation
Touch LEFT, RIGHT, or CENTER button to position the side of the
SURF GATE. The selected position changes to white and a progress
meter appears until the position is achieved. The boat speed must be
between 7.0 and 13.6 mph, with no active alarms to engage.
The selected position will be in READY MODE when the boat
speed is out of range or an alarm is active. Both SURF GATES
retract in the CENTER position. Normal SURF GATE system opera-
tion will resume after alarm condition are resolved and notifications
acknowledged. Refer to the following list of alarms.
To alert the driver and rider of SURF GATE position switch, the
TOWER LIGHTS will flash and audible beeps will sound. These
alerts can be disabled in the SURF GATE section of the SETTINGS
menu explained later in this section of the owner's manual.
Surf Gate Alarms
Under certain operating conditions, SURF GATE alarm notices
appear.
MAX CURRENT DRAW EXTENDING LEFT = Error with Left surf
actuator.
MAX CURRENT DRAW RETRACTING LEFT = Error with Left surf
actuator.
MAX CURRENT DRAW EXTENDING RIGHT = Error with Right
surf actuator.
MAX CURRENT DRAW RETRACTING RIGHT = Error with Right
surf actuator.
HIGH SPEED SURF GATE = Speed Exceeds 13.6 mph.
SURF GATE LEFT SWITCH = Gates limit switch is open after
retraction.
The gate will extend back out then retract again. If the switch is
still out a new alarm will appear "SURF GATE LEFT SWITCH SEE
DEALER". The SURF GATES will be locked until the battery is reset.
SURF GATE RIGHT SWITCH = Gates limit switch is open after
retraction.
The gate will extend back out then retract again. If the switch is
still out a new alarm will appear "SURF GATE RIGHT SWITCH SEE
DEALER". The SURF GATES will be locked until the battery is reset.
2019 Malibu Boats, LLC Owner's Manual • Page 65
https://www.boat-manuals.com/

Power Wedge Control

Tune the ideal wake for surfing and wakeboarding with the POWER
WEDGE.
tice will be displayed if the Power Wedge is in a
deployed position at speeds exceeding 26 mph. Boat
speed must be below 26 mph to dismiss the alarm.
Ensure all passengers are in the boat before changing the
Power Wedge position. Stay clear of the Power Wedge
while it is in motion. Extremities and clothing might
become pinched or caught and cause serious injury!
Power Wedge Operation
The POWER WEDGE position adjustment is permitted ONLY
when boat speed and POWER WEDGE position are within safe
operational range. The POWER WEDGE is NOT intended for use at
speeds greater than 26 mph. The POWER WEDGE will return to the
STOWED position only at speeds of 1 to 10 mph.
Before riding, deploy the POWER WEDGE to a downward position
by touching any one of the eight (8) position buttons on the POWER
WEDGE Control. If the wedge is in the STOW position (all the way
up) you can press any of the remaining buttons to deploy the wedge.
The remaining keys range from VERT, which is the most aggres-
sive wedge setting, to LIFT. The selected button will turn white.
The size and shape of the wake can be adjusted when the boat
has reached a speed of 10 to 26 mph. Select a new position on the
POWER WEDGE control or make fine adjustments using the buttons
on the bottom of the optional joystick.
Wedge Locator
The wedge locater widget will follow the POWER WEDGE during
motion. The white will indicate the current selected wedge location,
but may not reflect its actual physical position.
Auto Wedge
AUTO-WEDGE is the automatic active control of the POWER
WEDGE. The system helps the boat get on plane and reduce drag
The Power Wedge is not
intended for use at speeds
greater than 26 mph. An
alarm will sound and a no-