Gauge View And Speed Control; Night Mode; Speed Control Operation; Stereo Screen - Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

Table of Contents

Advertisement

To CHANGE the start code, touch the CHANGE button and enter
the current code followed by the NEW CODE.
To DISABLE the prompt, touch the DISABLE button and enter the
current code.
To RE-ENABLE the start code prompt, go into the settings menu
and select SHOW ENGINE CODE. From that menu, select the
SHOW button.

Gauge View and Speed Control

The GAUGE VIEW screen provides important engine parameters
and system status displayed by the speedometer, tachometer, engine
temperature, oil pressure, voltage and fuel gauges. The adjustment
buttons for the SPEED CONTROL cruise system are also contained
with the GAUGE VIEW screen.
1. Night Mode On/Off
2. Speed Control On/Off
3. Speed Up/Down
4. Power On/Off
5. Stereo Screen
6. Media Screen
7. Controls Screen
8. Maps Screen
9. Gauge View
10. Source Select
11. Seek/Track
12. Mute On/Off
13. Volume Adjust
14. Auto Volume

Night Mode

The NIGHT mode button toggles lighting brightness between
NIGHT and DAYTIME. Adjust preferences in the SETUP MENU.
The lighting of the Displays, Start/Stop Button, Power Button, and
Joystick Control dim to the value selected in the SETTINGS menu.

Speed Control Operation

Automatically maintain a consistent boat speed. When SPEED
CONTROL is ON and ENGAGED, the cruise control system will
control the speed of the boat after the ACTUAL SPEED has reached
the desired SET SPEED.
1. With the ENGINE RUNNING and in NEUTRAL, turn the SPEED
CONTROL ON by touching SPEED CONTROL button. The
button will turn GREEN and ON will be displayed. "SPEED
READY" is displayed above the THROTTLE BAR. Touching the
2019 Malibu Boats, LLC Owner's Manual • Page 78
https://www.boat-manuals.com/
speed control button again turns the speed control OFF.
2. Choose a desired SET SPEED by touching the SPEED UP/
DOWN BUTTONS.
3. Advance the THROTTLE POSITION until the engine takes
control and "SPEED ENGAGED" is displayed. A THROTTLE
TARGET WINDOW appears on the throttle bar until the engine
engages cruise control.
4. Keep the ORANGE THROTTLE MARKER inside the THROTTLE
TARGET WINDOW.
5. THROTTLE POSITION ADJUSTMENT is needed if the orange
throttle marker moves OUTSIDE the target window. If LEFT,
"MORE THROTTLE" is displayed until the marker is back inside
the window. If RIGHT, "OVER SPEED MODE" is displayed until
the marker is back inside the window. The DRIVER CONTROLS
THE SPEED OF THE BOAT until the marker is back inside the
window.
6. Touch SPEED UP/DOWN BUTTONS to adjust the desired SET
SPEED in 0.1 MPH increments after the engine has control.
Touch and hold the button to change the rate of change.
7. Returning the THROTTLE POSITION to NEUTRAL will
DISENGAGE speed control. Speed control is still ON, but
disengaged.
8. Turn the SPEED CONTROL OFF by touching the SPEED
CONTROL button and DISENGAGE the engine by returning the
throttle position to NEUTRAL. SPEED OFF appears above the
throttle bar.

Stereo Screen

Touch the STEREO button for direct access to certain audio
controls including AM/FM stereo channels, Satellite, USB, Bluetooth
wireless, auxiliary and SD car input ports.
1.
FM Radio
2.
Satellite Radio
3.
Bluetooth
4.
AM Radio
5.
USB 1
6.
Auxiliary Input
7.
Weather

Advertisement

Table of Contents
loading

Table of Contents