Table of Contents
Advertisement
7.0" Malibu Touch Command (MTC) Display
Save Preset Button
Touch the SAVE button to save all the current boat settings and
create a new preset.
Four Corner Buttons
The four corners of the display provide convenient access to depth,
display brightness, docking throttle profile, and the GO HOME preset.
DEPTH: Water depth is displayed in the top left hand corner of the
screen. A graphical view of depth is available by touching the DEPTH
SCREEN button at the top of the display.
NIGHT: The NIGHT button toggles display brightness between
NIGHT MODE and DAYTIME settings. These settings are adjusted in
the BACKLIGHTING section of the SETTINGS menu.
DOCK: The DOCK mode button changes the throttle sensitivity to
make docking more controlled. Normal throttle sensitivity returns by
touching the DOCK button a second time.
GO HOME: The GO HOME button enables GO HOME MODE.
This mode turns speed control off, drains all tanks, moves the SURF
GATE to center, and moves the POWER WEDGE to the stow posi-
tion once the boat is moving between 2 and 10 mph.
Depth Screen
The DEPTH SCREEN shows a graphical representation of depth,
in addition to water and air temperature readings.
NOTICE: If the water depth is less than the set DEPTH height
then a SHALLOW DEPTH ALARM will sound, and a notice will
display. The DEPTH height is adjusted in the CALIBRATION
section of the SETTINGS menu.
2019 Malibu Boats, LLC Owner's Manual • Page 63
https://www.boat-manuals.com/
Ballast Screen
Touch the BALLAST SCREEN button to drain, fill, and view current
ballast tank levels. Choose the perfect ballast combination to create
a custom wake.
NOTICE: TANK INDICATORS always display the ACTUAL
LEVEL in the tank whether resting, filling or draining. Optional
ballast bags can ONLY be filled or drained by touching the FILL
ALL or DRAIN ALL buttons.
Ballast Tank Operation
1. Touch the TANK INDICATOR to change the level. The indicator
will turn white. More than one can be selected if they have the
same DESTINATION LEVEL.
2. Touch one of the five DESTINATION LEVEL choices E, 1/4, 1/2,
3/4, or F. The TANK INDICATOR turns blur and continues to dis-
play the ACTUAL LEVEL, but now includes a spinning progress
indicator and filling or draining status above it.
3. Once the DESTINATION LEVEL is reached, the pump and spin-
ning indicator will stop.
Touch STOP, and then touch the corresponding TANK INDICATOR
to stop any pump.
Touch STOP ALL to stop all pumps at once, from filling or draining.
Touch FILL ALL to fill all tanks at once. The filling process will stop
when the tanks reach 100%.
Touch DRAIN ALL to drain all tanks at once. The draining process
will stop once the tanks are completely empty.
NOTICE: Once the FILL ALL or DRAIN ALL process is initiated,
the pumps WILL NOT STOP until the user stops them or the
system has powered down.
Advertisement
Table of Contents
