Malibu Boats Wakesetter 20VTX 2019 Owner's Manual page 83

Touch MALIBU
BLUETOOTH to
enable PAIRING,
and to edit the
Bluetooth name
of the boat. When
pairing a device to
the system, the default is "ViperII", but after pairing, the boat name
changes to "Malibu Boat."
Touch ABOUT (UP-
DATE) to view the
installed software
version, and
instructions on how
to install software
updates.
Touch BACKLIGHTING to adjust the BRIGHTNESS
of the display screen.
The NIGHT button
(located in the
bottom left corner of
the 12 in display) is
used to toggle
between the DAY-
TIME and NIGHT
MODE settings.
Touch SPEED/
THROTTLE, then
SOURCE, to select
the speed signal
source from Zero Off
or PADDLEWHEEL.
The default is Zero
Off. The boat must
be at idle throttle
when changing this setting.
2019 Malibu Boats, LLC Owner's Manual • Page 70
https://www.boat-manuals.com/
Touch SPEED/
THROTTLE, then
THROTTLE, to
select the throttle
sensitivity of STAN-
DARD or AGGRES-
SIVE.
Touch SPEED/
THROTTLE, then
CALIBRATION, to
calibrate the PAD-
DLEWHEEL speed
signal or adjust
the displayed speed.
You must use a
portable GPS
such as a smartphone app or navigation product to
determine ACTUAL SPEED.
Touch
CALIBRATION, then
UNITS, to choose
either ENGLISH or
METRIC units.
Touch
CALIBRATION, then
TEMP, to adjust
the DISPLAYED
air temperature to
match an
ACTUAL tempera-
ture reading.
Touch
CALIBRATION, then
DEPTH, to adjust
the height
at which the
SHALLOW DEPTH
ALARM will sound.