Wake View; Speed Control; Surf Gate Control - Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

Wake View

The WAKE VIEW screen provides a simplified wake control interface.
Use the BOAT/WAKE VIEW BUTTON to switch between modes.
WAKE SIZE OPERATION
Touch DRAIN ALL to automatically empty all the tanks at once.
Touch the SECOND button to fill the rear tanks to 25%.
Touch the THIRD button to fill all the tanks to 25%.
Touch the FOURTH button to fill the rear tanks to 50% and the front
tanks to 25%.
Touch the FIFTH button to fill all tanks to 50%.
Touch the SIXTH button to fill the rear tanks to 75% and the front
tanks to 50%.
Touch the SEVENTH BUTTON to fill all the tanks to 75%.
Touch the EIGHTH button to fill the rear tanks to 100% and the
front tanks to 75%.
Wake Shape Operation
The Wake Shape Control functions the same as the POWER
WEDGE Control. See POWER WEDGE operation instructions in this
section of the owner's manual.

Speed Control

Automatically maintain a consistent cruising rate with SPEED CON-
TROL. When turned on and engaged, the cruise control system will
hold the speed of the boat once the ACTUAL SPEED has reached
the desired SET SPEED.
Speed Control Operation
Turn SPEED CONTROL ON/OFF by touching the button to the left
of the displayed ACTUAL SPEED.
1. With the engine running and in NEUTRAL, press the SPEED
CONTROL button to turn the system ON. The button will turn
green and ON will be displayed. SPEED READY will appear
2019 Malibu Boats, LLC Owner's Manual • Page 64
https://www.boat-manuals.com/
above the THROTTLE BAR.
2. Choose a desired SET SPEED by touching the SPEED UP/
DOWN buttons.
3. Advance the throttle position until the engine takes control and
SPEED ENGAGED is displayed. A THROTTLE TARGET WIN-
DOW will appear on the throttle bar until the engine disengages
cruise.
4. Keep the orange THROTTLE MARKER inside the THROTTLE
TARGET WINDOW.
5. Throttle position adjustment is needed if the orange marker
moves outside of the target window. If left of the window, MORE
THROTTLE is displayed until the marker is moved forward. If
right, OVER SPEED MODE is displayed until the marker is back
inside the window. The driver has control of the boat speed until
the marker is back inside the window and the system is engaged.
6. Touch the SPEED UP/DOWN buttons to adjust the desired SET
SPEED in 0.1 MPH increments once the SPEED CONTROL is
engaged. Touch and hold the button for faster rate of change.
7. Returning the throttle position to NEUTRAL will disengage the
system. SPEED CONTROL is still ON, but disengaged.
8. Turn OFF the system by touching the SPEED CONTROL button
and returning the throttle position to NEUTRAL, which will disen-
gaged the engine. SPEED OFF will appears above the throttle
bar.
Speed Input
Press the SPEED INPUT button in to the lower left of the display to
access the SPEED INPUT SETTINGS. Select between the desired
speed input sources of Paddle Wheel or Zero Off - GPS. Changes
will not take place until throttle is put into IDLE position.

Surf Gate Control

Easily create a surf wake and switch it from side to side with the
press of a button, without having to adjust the ballast.
NOTICE: When speed exceeds 13.6 mph, the SURF GATES will
automatically move to the CENTER position until speed returns
to less than 13.6 mph.
The SURF GATES must be calibrated before use to work
properly. Follow the procedure in the SURF GATE section in the
SETTINGS menu in this section of the Owner's Manual.