Buzzer Volume - Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

Buzzer Volume

The buzzer volume
adjustment compensates for
increased engine noise. As
the boat speed increases, and
therefore the noises from the
engine increase, the volume
of the buzzer will increase
proportionately to the boat's speed between 0 and 25 mph (40.2
km/h). No further increase occurs at speeds above 25 mph (40.2
km/h). The buzzer emits a sound when the set speed is reached and
when reaching the buoys at a course. Select Buzzer Volume, and the
following appears:
Select the volume for High and Low speed by utilizing the up and
down arrows. Touch Back to return to the Slalom Settings screen.
River Mode and Offset
This feature provides speed adjustment
compensation for the water current. Choices
are Off, Down and Up.
Offset is the speed of the water flow
used in the correction.
Course Manager
Touch Course Manager
and the screen will expand to
display the following:
Utilize the up and down
arrows on the right to scroll
through the available courses.
Press Select Course when the
desired course is highlighted
(as in Course 3 shown in the
image).
To delete a course,
highlight the specific course
and touch Delete.
To edit the name of a course, highlight that course and touch
Edit. A keyboard will appear to rename the course.
To map or remap a course, touch Map (if not previously mapped)
or Re-Map (if previously mapped) Course. The following screen will
appear:
Touch the preferred course type, and the highlighting will be
bright white (as shown for Slalom - 6 Buoy in the image).
2019 Malibu Boats, LLC Owner's Manual • Page 87
https://www.boat-manuals.com/
Touch Continue, and the
following screen will appear:
Follow the prompts as you
run the course.
The blue bar will show
the progress through the
expected course.
Press the End Gate
button when crossing the
final gate. If the mapping was
unsuccessful, this screen will
appear.
If the remap was
successful, this screen will
appear.
Touching Continue will display a keyboard for the user to name
the course that was just mapped.
Auto Detect
Zero Off auto-detects previously mapped
courses within a 1-km radius of the boat. When an
auto-detected course should be over-ridden, simply
touch Auto Detect to turn it off.
Auto detect will be re-enabled any time the user changes modes
between slalom, jump or trick.