Rear Camera; Controls Screen; Settings Screen - Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

Rear Camera

With the BACKUP
CAMERA (where
equipped) turned ON
in the SETTINGS
Menu, the REAR
CAMERA option will
be selectable.

Controls Screen

Manage navigation
and accent lighting,
bilge pumps, blower,
heater, and settings.
If the buttons for
any equipment are
not shown, touch
SETTINGS and verify
that the output is ACTIVE.
Touch NAV to toggle the NAVIGATION LIGHTS ON/OFF.
Touch ANC to toggle the ANCHOR LIGHT ON/OFF.
Touch INTERIOR to toggle the INTERIOR LIGHTING ON/OFF.
Touch STORAGE to toggle the STORAGE LIGHTING ON/OFF.

Settings Screen

Touch the
SETTINGS button on
the CONTROLS page
to manage system
settings, options,
troubleshooting, and
software updates here.
View the available
settings list with the
SCROLL BAR on the right side of the screen and touch an item on
the list to VIEW available SETTINGS CHOICES. Touch the RED
X button to EXIT the setting screen. Changes will automatically be
saved upon leaving the SETTINGS screen.
Malibu Bluetooth
Touch MALIBU
BLUETOOTH to
enable Bluetooth and
PAIRING with the
PERFECT-PULL APP,
and to edit the name
2019 Malibu Boats, LLC Owner's Manual • Page 80
https://www.boat-manuals.com/
of the Bluetooth name of the boat. When pairing a device to the boat,
the default Bluetooth name is "ViperII", but after pairing, the name
changes to "Malibu Boat". Use the app to provide STREAMING
AUDIO on-board with an iOS or Android device.
About (Update)
Touch ABOUT
(UPDATE) to
view the installed
software version and
instructions for how
to install a software
update here.
Backlighting
Touch Backlighting
to adjust the
BRIGHTNESS setting
from 0-100% of the
display in DAYTIME
and NIGHT modes
with the slide bar
controls. The NIGHT
button on the display
toggles between the two settings.
GPS
Touch GPS to
change the speed
signal source
from Zero Off to
PADDLEWHEEL. The
default is Zero Off. The
boat must be at idle
throttle when changing
this setting.
Throttle
Touch THROTTLE
to change the
THROTTLE sensitivity
from STANDARD to
AGGRESSIVE.