Preset Screen; Media Screen - Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

until down force is required. The POWER WEDGE will move to
the selected position automatically once the desired speed is
achieved. AUTO-WEDGE is turned ON/OFF in the POWER WEDGE
section of the SETTINGS menu explained later in this section of the
Owner's Manual.
The factory default setting is ON.

Preset Screen

In the Preset Screen easily create and manage personalized user
experience preferences for that perfect ride.
Create New Preset
1. Touch NEW to start the step-by-step process of creating a preset.
2. Jump to any step in the process by touching BACK or NEXT, or
by touching the progress bar dot. Cancel at any time by touching
the EXIT button (red X).
3. Enter a preset NAME using the keyboard, then touch NEXT.
4. Select a preset PIC, then touch NEXT.
5. Select a SURF GATE position, then touch NEXT.
6. Select a SET SPEED for speed control using UP/DOWN, then
touch NEXT.
7. Select BALLAST LEVELS for each tank, then touch NEXT.
8. Select a POWER WEDGE position, then touch NEXT.
9. Select an AUTO-VOLUME level, turn it OFF, or use the default
level, then touch SAVE.
Copy a Preset
1. View the available presets in the list box. Use UP/DOWN to scroll
the list.
2. Select a preset by touching it in the list box.
3. Touch COPY to create a copy of the selection. Rename or make
changes using EDIT.
2019 Malibu Boats, LLC Owner's Manual • Page 66
https://www.boat-manuals.com/
Edit a Preset
1. View the available presets in the list box. Use UP/DOWN to scroll
the list.
2. Select a preset by touching it in the list box.
3. Touch EDIT to make changes using the same steps as CREATE
NEW PRESET.
Delete a Preset
1. View the available presets in the list box. Use UP/DOWN to scroll
the list.
2. Select a preset by touching it in the list box.
3. Touch DELETE to PERMANENTLY DELETE the selection from
system memory.
Load a Preset
1. View the available presets in the list box. Use UP/DOWN to scroll
the list.
2. Select a preset by touching it in the list box.
3. Touch LOAD to make this preset active in the SPEED CONTROL
system.
4. The screen will transition to the BALLAST SCREEN and the
loaded preset NAME will appear under the ballast controls.
CANCEL A PRESET
Turn the speed control system OFF to CANCEL a preset by
touching SPEED CONTROL. The POWER WEDGE, SURF
GATE and ballast will stay in the current position.

Media Screen

View a PDF document or video from an SD card. This feature
functions ONLY when the engine is OFF.