Advertisement

CUSTOMER ACKNOWLEDGEMENT
Hull Identification Number:______________________________
Retail customer acknowledges that they have received a copy of the Malibu Boats / Axis Owner's
Manual and that the dealer has reviewed the following with you:
Where to obtain service
Terms of the Limited Warranties (trailer, engine, boat, etc.)
Proper and safe operation of the boat
All sections of the Owner's Manual(s)
Retail customer acknowledges that the dealer has explained the operation and maintenance
requirements of their trailer (as provided at the time of purchase) and that any trailer that is not
provided as part of the OEM package at the time of manufacture, as well as any associated damage to
the boat due to non-factory trailer usage, is specifically excluded from Warranty Coverage.
Retail customer acknowledges that the warranty for this boat will be voided if unauthorized components
are added to the boat after the retail purchase unless specifically authorized by Malibu Boats, LLC. This
includes components such as Surf Gates™, fins, wedges, etc.
Customer Name(s)
Print Name __________________________
Print Name __________________________
Print Name __________________________
Dealer Name(s)
Print Name __________________________
Print Name __________________________
Print Name __________________________
Return of this form to Malibu Boats / Axis is a condition of Warranty Coverage. Selling Dealer must
return this form to Malibu Boats / Axis via email (warrantyregistrations@malibuboats.com) during the
Warranty Registration process.
This form must also be completed as part of a Warranty transfer and returned to Malibu Boats before
any remaining Warranty can be transferred to a subsequent owner.
Customer Signature(s)
Sign Name ___________________________
Sign Name ___________________________
Sign Name ___________________________
Dealer Signature(s)
Sign Name ___________________________
Sign Name ___________________________
Sign Name ___________________________
1

Advertisement

Table of Contents
loading

Summary of Contents for Malibu Boats Boat 2014

  • Page 1 Print Name __________________________ Sign Name ___________________________ Return of this form to Malibu Boats / Axis is a condition of Warranty Coverage. Selling Dealer must return this form to Malibu Boats / Axis via email (warrantyregistrations@malibuboats.com) during the Warranty Registration process.
  • Page 2 Notes...
  • Page 3 All information and specifications included in this manual were in effect at the time of approval for printing. Malibu Boats LLC reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.
  • Page 4 Notes...
  • Page 5: Table Of Contents

    VTX Table Installation..2-52 Drain Plugs....2-53 MALIBU BOATS LIMITED Speedometer Pickup... 2-54 WARRANTY .
  • Page 6: Table Of Figures

    ABLE OF IGURES Figure 1-1 Personal Flotation Figure 2-28 Pivoting-Head Ski Pylon..2-49 Devices ......1-5 Figure 2-29 Swim Platform .
  • Page 7 Figure 4-4 GRV ..... 4-7 Figure 4-5 ICV ..... . 4-7 Figure 4-6 Attwood Carbon Canister .
  • Page 8 Notes...
  • Page 9: Introduction

    Please read carefully and familiarize yourself with the craft before using it. We at Malibu Boats thank you for choosing us as your boat manufacturer and assure you that your satisfaction and boating enjoyment will continue to be our #1 priority.
  • Page 10 viii Hull Identification Number (HIN) Your Hull Identification Number can be found on the starboard transom of your boat below the rub rail. Federal law prohibits the tampering or removing of the number in any way. Use this number to register your boat with your local and state authorities. US MB2GXXXXA001 Proposition 65 A wide variety of components used on this vessel contains or emits...
  • Page 11: Boating Safety

    Chapter 1 OATING AFETY At Malibu, safety is not an option! Safe operation of a boat is the responsibility of everyone using the boat. Boats should never be used in an unsafe manner. If you are not an experienced boater, it is our recommendation that you attend a safe boating class before using your boat.
  • Page 12: Safety Statements

    Safety Statements Throughout this manual, specific precautions and symbols identify safety related information. Follow these precautions as indicated. The Safety Alert symbol means Attention! Become Alert! Your Safety Is Involved! Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.
  • Page 13: Regulations

    or dangerous activities. Boaters/users assume all risks for such actions. DO NOT use the boarding platform for any other purpose than boarding the boat or preparation of entering the water, and DO NOT use the boarding platform when the engine is running.
  • Page 14 Education If you have never owned a boat before, you can get an excellent introduction to boat handling from organizations such as the U.S. Coast Guard, American Red Cross or your local authority. Even if you are a veteran boater, these courses will help sharpen your boating skills as well as bring you up to date on current rules and regulations.
  • Page 15 Excessive Noise Noise means engine noise, radio noise or even yelling. Many bodies of water have adopted noise limits. Music and loud conversation can carry a considerable distance on water, especially at night. Wake and Wash Be alert for NO WAKE zones. You are responsible for any damage or injury caused by your wake/wash.
  • Page 16: Emergencies

    Boats more than 16 feet in length must be equipped with one type I, II, III or V and one type IV. PFDs are intended to save lives; you and your passengers should wear them while in the boat. Learn how to use them and adjust as necessary to make comfortable to wear.
  • Page 17: Hazardous Conditions

    Fires Many boat fires involve flammable liquids such as gas or oil. Many inboard fires start in the bilge area which at times can be filled with gas vapors. Since gas vapors cannot be seen, boat fires tend to travel very fast. If you encounter a fire on board, turn off the engine immediately.
  • Page 18: Carbon Monoxide

    Damage to underwater gear caused by shallow water maneuvering is not covered by your warranty. Warning Markers Learn to recognize the different buoys and day markers; they are used as the signposts of the waterways identifying navigable routes and water hazards.
  • Page 19 KC-0461M Figure 1-5. Carbon Monoxide Hazards...
  • Page 20: Operation By Minors

    1-10 Operation by Minors If your boat will be operated by a minor, remember to have an adult present at all times. Many states have laws regarding minimum age and licensing requirements for minors. Contact state and local authorities for special requirements that may apply in your area. Passenger Safety Any time you take your boat out, make sure that there is at least one other passenger aboard who is familiar with the operation of your boat.
  • Page 21 1-11 Types of Buoys There are several types and shapes of buoys. Buoys may be unlighted, lighted, with sound or may have both an audible and a visual signal. Lights, bells and horns are used on buoys for night or poor visibility conditions. Different shapes of buoys are shown below.
  • Page 22 1-12 Right-of-Way Notice: In general, boats with less maneuverability have right-of-way over more agile craft. You must stay clear of the vessel with right-of-way and pass to his stern. Privileged Boats Privileged boats have right-of-way 12 O'CLOCK and can hold course and speed. Sailboats and boats paddled or rowed have the right-of-way over PRIVILEGED...
  • Page 23 1-13 Overtaking The boat that is overtaking one ahead of it is the burdened boat and must make any adjustments necessary to keep out of the way of the privileged boat. HORN HORN (2 SHORT (2 SHORT BLASTS) BLASTS) HORN BURDENED PRIVILEGED HORN...
  • Page 24 1-14 Notes...
  • Page 25: Gauges & Controls

    Chapter 2 & C AUGES ONTROLS No other ski boat manufacturer incorporates in their product as many innovative and technically advanced features as Malibu. Standard Gauges The following gauges are included on all models. It is important for the safe and proper operation of your boat to fully understand these gauges.
  • Page 26 Malibu’s state of-the-art Malibu Graphical In-Dash Display Center enables the operator to observe and control many graphic functions that are applicable to the performance and use of your boat. These include Malibu Cruise Control, Ballast Monitoring System (BMS), Air/Sea Temperature, Depth, as well as standard use gauges for monitoring service requirements, voltage, engine temperature, oil pressure, remaining fuel level and percentage, speedometer and tachometer.
  • Page 27 Tachometer Located to the left side of the dash panel, the tachometer registers the operating speed of your engine in revolutions per minute (RPM). This gauge is used to provide you with information needed to ensure the engine is kept within the engine manufacturer’s recommended proper range of operation.
  • Page 28 Figure 2-6. Dash Gauges Engine Temperature The temperature gauge is located at the lower center left bottom panel of the dash display. The temperature gauge indicates the temperature of the water/coolant inside the engine. The proper operating range for your engine is between 140 – 185º F. All engines are equipped with an engine control module that will cause the engine to run at reduced speeds (power reduction mode) if the engine is running above recommended operation temperatures.
  • Page 29 Oil Pressure The oil pressure gauge is located at the lower center of the bottom panel of the dash display. The oil pressure gauge indicates the oil pressure in the engine while the engine is running and is measured in pounds per square inch (psi). Oil pressure may vary with engine speed, outside temperatures, oil viscosity and other environmental factors.
  • Page 30 Figure 2-8. MaliView In-Dash Display MaliView Setup Screen • The up and down arrows toggle through all the options in each edit screen. • Use the “ON/OFF/ENTER” button to toggle between edit screens and select changes. Return to Factory Default Screen •...
  • Page 31 Adjust Auto Volume Automatically increases/decreases the volume of the stereo as boat speed increases/decreases Depth Level Alarm Screen Speed Calibration Screen Wedge Setup Screen...
  • Page 32 English Metric Mode (English or Metric Conversion) Video ON/OFF Setup Turns on or off all available video screens Gauge Diagnostic Mode (Gauge Sweep Mode Test) Current Software Version System Diagnostic Screen...
  • Page 33 Active and Inactive Engine Fault Screen Malibu Surf Gate™ The SURF GATE control will appear on every touch screen except the SETUP screen once enabled. To enable the Surf Gate, access the SETUP screen in the SWITCH page. Use the up/down buttons to highlight the SETUP SURF GATE option to enable. The SURF GATE must be enabled and calibrated in the viper setup screens.
  • Page 34 2-10 Button Modes SURF GATE CENTER GREEN indicates that both gates are in the retracted position. LEFT yellow indicates that the right gate will extend when the boat is above 7 mph and below 13.6 mph. LEFT green indicates that the right gate has extended fully for surfing on the left side of the boat.
  • Page 35 2-11 Malibu Mobile Device Gateway The MDG (Mobile Device Gateway) 0000 system is automatically added to the Touch screen when the MDG module is installed. If MDG is not automatically enabled then you can manually enable it on the Setup screen.
  • Page 36 2-12 Once the MDG is turned on by pressing the ON/OFF button the boat is discoverable by other devices. The system can control what device is connected by either accepting or declining the connection. Only one device at a time can be connected. FRED’S SETTER FRED’S IPHONE FRED’S IPHONE...
  • Page 37 2-13 Malibu Pre-Sets How to Use the Malibu Pre-Sets The Malibu pre-sets Save, Store and Control 4 different parameters: • 1 – Boat Speed/Cruise Control • 2 – Wedge Angle/Boat Angle Control • 3 – Ballast Level • 4 – Surf Gate The system is easy to operate once you understand what you are controlling and know what to expect from it.
  • Page 38 2-14 MaliView Pre-Sets Screen RIDER R MLS CRUISE CRUISE 21.8 STOW HALEY WAKEBOARD PRE-SETS STOW ED SURF LEFT ON / OFF MEDIA ENTER 15.0 STOW SETUP BLANK GAUGES EDIT PRE-SET • Enter pre-sets using the “PRE-SETS” button. • Press the “EDIT PRE-SET” button to edit the highlighted pre-set. (See MaliView Edit Pre-Sets Screen.) •...
  • Page 39 2-15 MaliView Edit Pre-Sets Screen RIDER R MLS CRUISE CRUISE 21.8 STOW HALEY WAKEBOARD PRE-SETS PRE-SET EDIT PRE-SET EDIT MLS FRONT PICTURE OPTIONS: ON / OFF MEDIA ENTER SETUP GAUGES EXIT EXIT SAVE SAVE NO SAVE NO SAVE • Press the “SAVE” button to save any changes to the pre-set. •...
  • Page 40 2-16 Speed Edit Screen RIDER R MLS 21.8 STOW HALEY WAKEBOARD PRE-SET EDIT SET POINT 20.2 EXIT EXIT SAVE SAVE NO SAVE NO SAVE • Use the up and down buttons to change the speed. • Press “ENTER” to accept. •...
  • Page 41 2-17 Boat Alarms and Engine Faults for Mini Multi-Functional Display Malibu Boats are equipped with two separate computers connected to many sensors and controllers that constantly monitor various functions of the boat and engine. Certain functions, if outside of a pre-determined operational parameters, may activate an alarm.
  • Page 42 2-18 “WEDGE FAULT UNBALANCED” is a The “WEDGE FAULT STARBOARD signal from the Lenco box indicating an ACTUATOR AVERAGE” is a signal from actuator failure, alignment or fault. the Lenco box indicating a starboard actuator failure or fault. “LOSS OF CAN SIGNAL” alarm occurs “AUTO BILGE PUMP ON”...
  • Page 43 2-19 The “Engine Fault” alarm: Is activated by the ECM. The problem could be a momentary out of parameter minor issue or the problem could be catastrophic. If the “Engine Fault” alarm is activated, look at the gauges, oil P, temp and volts, and then shut down the engine, Key off, then restart.
  • Page 44 2-20 Clock/Hour Display Press the E to display the setup screen “Clock/Hour Display.” The month, day and year will be displayed. Set month first, press enter “E (Enter)” to move to the next selection; to set the day, press “E (Enter)”, then completed hour, day, then “E (Enter)”. Once the year is set, the selection will continue to set the time.
  • Page 45 2-21 Malibu Precision Pro Speed Control Operation of Malibu Precision Pro Speed Control Favorite Adjust set points by pressing up and down arrows. Adjustments can be done with system on or off Turn Cruise on/off by pressing the RED button cruise Typical screen for the WKBRD A preset of a boat that has a Power wedge and...
  • Page 46 2-22 In the upper port corner of the display menu is the CRUISE button. To activate, turn the engine on. While in NEUTRAL, press the cruise button on your display to engage/activate the system into speed control mode. Press the red button to turn the speed control ON.
  • Page 47 2-23 MaliView Cruise Screen Ballast Tank Levels and Fill Status RIDER R MLS Wedge STOW angle Rider screen Picture A STEP BEYOND CURRENT Rider Name Red indicates the filling status Green indicates the target level Indicates the wake shaping zone RIDER R MLS CRUISE...
  • Page 48 2-24 MaliView RPM Cruise Screen RIDER R MLS CRUISE STOW A STEP BEYOND CURRENT PRE-SETS RPM ON RPM SET RPM ACTUAL 2500 ON / OFF MEDIA ENTER 100% SETUP GAUGES VOLT 11.8 V STEREO TEMP 185 ºF 101.7 65 PSI •...
  • Page 49: Power Wedge

    2-25 Power Wedge Figure 2-10. Power Wedge Figure 2-11. Power Wedge The Power Wedge (PW) is an adjustable wake enlargement device designed specifically for wakeboarding. It is not intended to be used over 25 MPH. The PW alarm will activate if the foil is not in the “stowed”...
  • Page 50 2-26 The Power Wedge Foil will deploy from the fully up or “stowed” position to the fully down or “operating position” as long as the boat speed is under 10 MPH. It will deploy “down” sitting on the trailer if the key is ON and the switch is depressed on the “DOWN” arrow.
  • Page 51: Circuit Breakers

    2-27 Circuit Breakers All major boat circuits are protected from shorting and overload by resettable circuit breakers. If a problem develops with one of the following circuits, switch off the circuit and wait about one minute. Then push the appropriate breaker button fully and switch on the circuit.
  • Page 52 The Main screens are the CODE ENTER screen, the MLS screen, the LIGHTS screen, the SWITCH screen and the optional NAVIGATION screen. Malibu Boats equipped with the Malibu Touch Command are also equipped with a remote ignition key switch. This remote key is provided for emergency use only.
  • Page 53 2-29 Malibu Code Entry Screen Use the KEY PAD to enter the four-digit start code. The numbers will appear on the left. The numbers will disappear when the correct numbers have been entered. The ENTER CODE button The START button will Press the STOP button to will appear until the code appear after the code has...
  • Page 54 2-30 Malibu MLS Screen The MLS screen is set up to control the available water tanks on the boat. The user has the ability to fill or drain all the tanks at once or control the tanks individually. The tank configurations can be changed in the SETUP menu located on the SWITCH screen.
  • Page 55 2-31 Malibu Lights Screen The LIGHTS screen is where all the available lights for the boat are controlled. Depending on how many lights are available on the boat a button will be displayed in approximate location of the light. Optional lights can be added or removed in the setup screen located on the SWITCH screen.
  • Page 56 2-32 Malibu Setup Screen The SWITCH screen is where all the available options for the boat are controlled. Depending on how many lights are available on the boat a button will be displayed in approximate location of the light. Optional heater switch can be added or removed in the setup screen.
  • Page 57 2-33 Malibu Setup Screens The setup screen is used to keep the software up to date and adjust and troubleshoot the Touch Command/MaliView system. Use the UP and DOWN buttons to highlight the setup mode desired. Press ENTER button to access the mode highlighted. Pressing the ENTER button will activate the RESET TO FACTORY SETTINGS.
  • Page 58 2-34 Pressing the ENTER button will activate the UPDATE TOUCH COMMAND mode. The UPDATE will read a USB and load the SmartTouch.mem file. The update will not work unless the file is named SmartTouch.mem. The system will reset automatically when complete.
  • Page 59 2-35 Malibu Set Dim Level Screens The setup screen is used to keep the software up to date and adjust and troubleshoot the Touch Command/MaliView system. Use the UP and DOWN buttons to highlight the setup mode desired. Press ENTER button to access the mode highlighted. Pressing the ENTER button will activate the BACKLIGHT DIM LEVEL mode.
  • Page 60 2-36 Malibu Setup Outputs Screens The setup screen is used to keep the software up to date and adjust and troubleshoot the Touch Command/MaliView system. Use the UP and DOWN buttons to highlight the setup mode desired. Press ENTER button to access the mode highlighted. Pressing the ENTER button will activate the SETUP OUTPUTS mode.
  • Page 61 2-37 Malibu Setup Lights Screens The setup screen is used to keep the software up to date and adjust and troubleshoot the Touch Command/MaliView system. Use the UP and DOWN buttons to highlight the setup mode desired. Press ENTER button to access the mode highlighted. Pressing the ENTER button will activate the SETUP LIGHTS mode.
  • Page 62 2-38 Malibu Setup Navigation Screens The setup screen is used to keep the software up to date and adjust and troubleshoot the Touch Command/MaliView system. Use the UP and DOWN buttons to highlight the setup mode desired. Press ENTER button to access the mode highlighted. Pressing the ENTER button will activate the NAVIGATION mode.
  • Page 63 2-39 Malibu About Touch Command Screens The setup screen is used to keep the software up to date and adjust and troubleshoot the Touch Command/MaliView system. Use the UP and DOWN buttons to highlight the setup mode desired. Press ENTER button to access the mode highlighted. Pressing the ENTER button will allow you to view the current software version in the Touch Command display.
  • Page 64 2-40 Accessory Switch Panels These panels are located in the dash directly below the standard gauges and are used to activate the following features. You will find the feature or accessory provided within each button face for description. • Horn •...
  • Page 65 2-41 Stereo Power The optional stereo system can be activated by either turning the ignition key on, or can be used without the engine started by turning the key to the left position; for boats equipped with Malibu Touch Command, the power button will turn on the stereo. Accessory #1 This switch is used to supply power to the optional heater unit.
  • Page 66 2-42 Pressing the BILGE button will toggle the POWER module output and MUX display from OFF to ON and back to OFF again. Pressing the DASH LIGHTS button will toggle the POWER module output and MUX display from OFF to ON to DIM 1 to DIM2 and back to OFF again. DIM 1 and 2 are two lower levels of brightness for the dash.
  • Page 67 2-43 Function Edit Mode Enter Function Edit 1. Hold PAGE, button #4, and button #5 at the same time for 3 seconds. 2. Press button 1(YES) to enter edit mode or 2(NO) to exit edit mode. 3. Press the PAGE button to switch between the edit modes CHANGE, DELETE, and INSERT.
  • Page 68 2-44 Insert Mode 1. Press button 1(YES) to enter INSERT mode or 2(NO) to exit edit mode. 2. If 1(YES) is pressed return to icon page in INSERT mode. If you do not change a button and cycle through all the pages by pressing the page button you will also exit the edit screen.
  • Page 69: Throttle Control

    2-45 Throttle Control The throttle lever is located to the right of the driver. When the throttle is vertical, it is in the NEUTRAL position. Some model throttle levers are equipped with a neutral shift lock activation button at the base of the throttle control (Figure 2-19a).
  • Page 70: Steering System

    2-46 Electronic Throttle Control (ETC) All current Malibu Boats are equipped with electronic throttle control. The helm throttle control “E-MV3” is now dual, variable voltage potentiometer that sends electronic signals back to the engine ECM via a shielded wire harness with the highest quality water-tight connectors that mates to the engine ECM.
  • Page 71: Motorbox Cover

    2-47 Motorbox Cover The upholstered motorbox reduces engine noise and provides protection for the passengers on board. To open, stand on the port side of the box near the observer seat, grasp the handle near the floor and pull open. The motorbox is equipped with either one or two gas-filled shock absorbers (depending on model) to provide support for the compartment when opened.
  • Page 72: Ice Chest

    2-48 Integral Self Draining Ice Chest This item is available on most model boats and can be found either in the starboard passenger seat or center floor. Some models also have an insulated removable bag. The melted ice will drain into the bilge area of your boat. Sundeck Most boat models are equipped with a standard sundeck feature designed for sunbathing comfort.
  • Page 73: Swim Platform

    2-49 Malibu Boats’ “Pivoting-Head” ski pylon is designed for normal water skiing activities: slalom, jumping, kneeboarding, tricks, and barefooting. Any other uses such as parasailing, kite flying, towing pyramids of skiers, etc., may over-stress the pylon and possibly cause personal injury and/or equipment damage.
  • Page 74: Navigational Lights

    All Malibu Boats are equipped with bow and all-around navigational lights. The bow light located at the tip of the bow is two colored —...
  • Page 75 2-51 Transom Storage Some boat models are equipped with transom ski storage. Depending on the model, the storage is accessible from either the interior by lifting the observers’ seat or from the transom swim platform by lifting the hatch cover. Most models are equipped with a locking device for the secure storage of your ski items.
  • Page 76: Vtx Table Installation

    2-52 VTX Table Installation The 2014 VTX comes equipped with the side-mounted table. To install: 1. Remove the table top from the transom storage and the table support pole from under the port-side pull-up cushion. 2. Slide the base of the pole into the mounted receiver. 3.
  • Page 77: Drain Plugs

    2-53 Drain Plugs Your Malibu is equipped with two or three drain plugs; one located at the transom of your boat and the other directly below your engine/drive train. On the walkthrough open bow models, you will find an additional drain plug in the ski locker or ballast area of your boat directly in line with your ballast pumps.
  • Page 78: Speedometer Pickup

    2-54 Speedometer Pickup Your boat is equipped with a Paddle wheel speedometer pickup, which can be found directly under the running surface of your boat. The paddle wheel is used to measure static water by rotation of the paddle wheel unit. The paddle wheel unit unit also monitors the Sea Temperature unless a Depth Transducer is installed (which will then assume the responsibility to measure Sea Temperature).
  • Page 79: Exhaust

    2-55 Exhaust The exhaust system is used to remove engine exhaust fumes. To ensure that your boat’s exhaust system is working correctly, it is important that you inspect for exhaust leaks. The following information will allow you to check these systems. Keep in mind that you will be checking engine while turned on, and that you will need to take safeguards against getting yourself or others caught in the moving parts.
  • Page 80: Closed Cooling System

    2-56 Closed Cooling System If your boat is equipped with an optional closed cooling system, you will need to maintain correct fluid levels. • Open engine compartment and remove reservoir cap. • Ensure coolant is to the top of the reservoir filler neck. •...
  • Page 81 2-57 Damage caused to your boat as a result of improper cover use is not covered under your Malibu Boats warranty. Damage can result from wind whipping, and possibly cause abrasions to your gelcoat surface or upholstery. Use the proper shipping cover for travel purposes. Usage of any color boat cover other than the factory gray will void the upholstery warranty.
  • Page 82 2-58 Stereo Controls When in the radio screens, the left and right buttons will respond to the label directly inside the button. For example, the CRUISE button is now the BACK TO VIPER button in all PAGE 1 screens in every mode. Fosgate FM/AM Radio Screens AUX Radio Screens...
  • Page 83 2-59 Fosgate USB DRIVE Radio Screens...
  • Page 84 2-60 SIRIUS Radio Screens...
  • Page 85 2-61 Fosgate IPOD Radio Screens...
  • Page 86 2-62 Fosgate Video Radio Screens The Fosgate radio with video has a menu screen that can be navigated and controlled using the Viper buttons. To use this ability, the radio video screen with button needs to be enabled in the MEDIA SETUP screen in SETUP. This mode will bring up buttons on the side for 5 seconds.
  • Page 87 2-63 Video Operation The POV option includes the ability to start and stop a recording using the display’s ENTER button. To use this ability, the video screen with capture needs to be enabled in the MEDIA SETUP screen in SETUP. There is also a new module that will be needed to make the Viper system work with the POV.
  • Page 88 2-64 Auto-Volume for MaliView One of the enhancements to the software for the MaliView is the addition of auto- volume. This feature will automatically increase and decrease the volume of the stereo as boat speed increases and decreases. You can access the auto-volume feature through the MaliView Setup Screen (see page 2-6).
  • Page 89: Viper Chart Plotting Instructions

    2-65 Viper Chart Plotting Instructions Map Screen This section will attempt to familiarize the operator with the features and functions of this system. The Medallion Navigation system uses GPS (Global Positioning System) satellites, and a map database to calculate and display route directions. The GPS is based on satellites which orbit the earth and continuously emit signals.
  • Page 90 2-66 Navigation Menu Above is the main navigation menu screen. From here the operator can get to any area of the navigation system. Pressing the ENTER button will display the MAP screen.
  • Page 91 2-67 Map View Starting at the Navigation Menu screen, the MAP screen can be adjusted to show the MAP on the entire screen or show gauge information along the right hand side of the display. Underneath the words “MAP VIEW” are the words “FULL” and “GAUGE”. The word that is highlighted indicates how the MAP screen will be displayed.
  • Page 92 2-68 Map Orient The MAP screen can be adjusted to orient the map with north always at the top of the screen, or with the boat heading at the top of the screen. Underneath the words “MAP ORIENT”, toward the top left of the screen, are the words “BEARING” and “NORTH”. The word that is highlighted indicates how the MAP screen will be oriented.
  • Page 93 2-69 Select Course Creating a New Course...
  • Page 94 2-70 Using the arrow buttons, highlight the “SELECT WAYPOINT LOCATION”. Using the arrow buttons, move the cursor (cross) to the beginning location of the desired course and press the “WAYPOINT” button A new window will appear showing the available waypoint options. Use the arrows to highlight the desired waypoint and press “ENTER”.
  • Page 95 2-71 Select Auto Course Creating a New Auto Course...
  • Page 96 2-72 After selecting “START COURSE RECORD,” the map will appear. Your location is the boat image (in the screen to the left it is within the blue box). The navigation software will track your movements until the STOP COURSE option is selected.
  • Page 97 2-73 Filter The FILTER menu allows the operator to adjust/change what is displayed throughout the various screens. From the Navigation Menu screen press the DOWN/RIGHT arrow to adjust the filters. The screen above shows the objects that may be available to display. If there is an object that is not desired, remove the check box and that object will not be displayed in the map.
  • Page 98 2-74 GPS Status From the Navigation Menu screen press the DOWN arrow to access the GPS STATUS screen. The GPS STATUS menu allows the operator to view up to a 16 position satellite signal strength graph on the right side of the display, and a 4 point compass graphic showing the relative position of each satellite on the left side of the display.
  • Page 99 2-75 Setup From the Navigation Menu screen press the DOWN/LEFT arrow to access the SETUP menu. The SETUP menu allows the operator to adjust, view and configure the navigation system through eight menus.
  • Page 100 2-76 Screen Level SCREEN LEVEL is the contrast adjustment menu. Highlight the SCREEN LEVEL and press the ENTER button. The screen below will appear. Using the arrows, UP/DOWN changes between the low/high scale, Normal Mode, High Contrast, and Night View. The LEFT/RIGHT arrows control the slide on the Low to High brightness scale.
  • Page 101 2-77 Transparency Level TRANSPARENCY LEVEL can be set to enable the user to see the map while viewing the menus. Highlight the TRANSPARENCY LEVEL and press the ENTER button. The screen below will appear. Using the arrows, UP/DOWN changes between the transparency scale and the EXIT. The LEFT/RIGHT arrows control the slide on the transparency scale.
  • Page 102 2-78 GPS Setup GPS SETUP can be set to enable what data and accuracy the user wants to see on the map while operating the menu features. Highlight the GPS SETUP and press the ENTER button. The screen below will appear. Using the arrows, UP/DOWN changes between the Coordinate styles and WAAS status options.
  • Page 103 2-79 GPS Status Map GPS STATUS MAP will display the satellite signal strength. Highlight the GPS STATUS MAP and press the ENTER button. The screen below will appear. The GPS STATUS menu allows the operator to view up to a 16 position satellite signal strength graph on the right side of the display, and a 4 point compass graphic showing the relative position of each satellite on the left side of the display.
  • Page 104 2-80 System Gauge Setup SYSTEM SETUP will display the gauge options that can be shown when the gauge information is displayed on the right side of the screen. Highlight the SYSTEM SETUP and press the ENTER button. The screen below will appear. Any of the options listed above can be displayed in the gauge area of the MAP screen.
  • Page 105 2-81 Depth Level Setup DEPTH LEVEL SETUP will display the options for how to draw the mapped depth contours of the various waterways. Highlight the DEPTH LEVEL SETUP and press the ENTER button. The screen below will appear. The options listed above will change how the waterways are to be displayed on the MAP screen.
  • Page 106 2-82 System Units Setup SYSTEM UNITS SETUP will enable the operator to change speed units between Knots and Miles Per Hour. This menu also allows the operator to change distance units between Nautical Miles and Miles. Highlight the SYSTEM UNITS SETUP and press the ENTER button.
  • Page 107 2-83 Color Setup COLOR SETUP will enable the operator to change the color settings on most menu options. Highlight the COLOR SETUP and press the ENTER button. The screen below will appear. The options listed above will change the color of that feature that is to be displayed on each screen.
  • Page 108 2-84 Exit Setup Highlighting the EXIT SETUP and pressing ENTER will bring the display back to the MENU screen.
  • Page 109 2-85 NAV BY Map—Compass—OFF From the Navigation Menu screen press the LEFT arrow to change the way the system navigates. There are three modes of navigation: MAP, COMPASS and OFF. MAP mode shows the Course name, Next Waypoint and Destination. COMPASS mode shows the compass rotating with the heading always at the top of the screen.
  • Page 110 2-86 Compass From the Navigation Menu screen press the LEFT arrow to change the highlight to COMPASS. This will change the top three options in the menu to the screen below. POI NOTIFY (ON/OFF) — Indicates when you are near a Point Of Interest on the map. TRACK TRAIL (ON/OFF) —...
  • Page 111 2-87 Hot Water Shower If your boat is equipped with a hot water shower, you will find an ON/OFF accessory switch located in the rear storage area. You will find the valves located on the starboard side of the motorbox compartment. The shower head can be found in the port gunnel sides.
  • Page 112 Only factory pre-drilled holes should be used to install factory accessories on the tower. The use of aftermarket accessories not supplied by Malibu Boats may cause damage not covered by the tower warranty. Drilling any additional holes in the tower will void any structural warranty.
  • Page 113: Wedge

    2-89 Wedge The Malibu Manual Wedge foil is a solid, one piece, welded design constructed from solid stainless steel. The wedge foil no longer locks in the down position. It is designed to move up or down freely and locate in the down position.
  • Page 114 2-90 Notes...
  • Page 115: Operation

    Chapter 3 PERATION Everyone benefits from the safety of others. Trailering The trailering information contained in this section describes general guidelines and procedures used by many boaters. We recommend, in addition, that you always follow the specific information provided by the manufacturer of your trailer. Load Carrying Capacity The certification label attached by the manufacturer on the left forward side of the trailer will show the maximum load carrying capacity of the trailer.
  • Page 116 Safety Chains Safety chains on your boat trailer CRISSCROSS SAFETY CHAINS provide added insurance that it will not become completely detached from the TRAILER VEHICLE towing vehicle when underway. Crisscross the chains under the trailer tongue to prevent the tongue from dropping to the road if the trailer separates from the hitch ball.
  • Page 117 Backing the Trailer Backing the boat trailer may sometimes be a difficult task. It is recommended that you practice backing the trailer in a vacant lot or open area before attempting it at a congested boat launch. Follow these basic rules when backing: 1) Turn the front vehicle wheels in the opposite direction in which the trailer is to travel.
  • Page 118: Warning Labels

    Warning Labels Warning labels are displayed at various locations throughout your new Malibu to point out safety hazards. It is important that you take the time to locate these labels. Do not remove or cover warning labels. Replace when illegible. Figure 3-5.
  • Page 119 Warning Label Locations Refer to the diagrams below for the location of each label.
  • Page 120 Load Capacity The U.S. Coast Guard and most maritime authorities require that boats under 20 ft have a certification or builder’s plate stating the number of persons and maximum weight a boat will handle safely under normal conditions. Weather conditions and other factors can adversely affect the performance of the boat and must be taken into consideration when loading to avoid an unsafe condition.
  • Page 121: Fueling

    Malibu Boats reminds you that when your boat is fully loaded with the maximum number of persons and gear as indicated on the capacity plate, boat speed and performance will be affected. Operate a boat in this condition with extra care.
  • Page 122 Green Fuel System Integration Due to a federal mandate from the EPA to reduce hydrocarbon emissions, Malibu Boats, in cooperation with Attwood and Moeller Marine, has developed a new integrated fuel tank system that dramatically reduces hydrocarbon emissions from our product. This new Green fuel system is EPA-compliant to 2012 standards and is compliant with proposed 2014 CARB phase 2 proposals.
  • Page 123: Starting

    Starting First Start-Up of the Day On the first start-up of the day, you may find it beneficial to “key up” once or twice to prime the fuel system prior to cranking the engine to start. The fuel system pressure will drop after a few hours of non-use.
  • Page 124 3-10 Starting the Engine Malibu boats are equipped with sensors that constantly monitor various functions of the boat. Certain functions, if outside of pre-determined operating parameters, may activate an alarm located under the dash. When the ignition is turned ON, the alarm will sound to indicate it is operating.
  • Page 125: Shifting/Running

    3-11 Shifting/Running The throttle lever is located to the right of the driver. When the throttle is vertical, it is in the “NEUTRAL” position. Located at the base of the throttle you will find the shift lock knob. Pulling outward on this knob disengages the transmission, thereby allowing use of the throttle without engaging the transmission.
  • Page 126 3-12 RIGHT TURN LEFT TURN BACKING TO LEFT Turn wheel to right—Stern Turn wheel to left—Stern Turn wheel to left—Stern will move to left. will move to right. will pull to left. KC-0199-A Figure 3-9. Turning with a Rudder The steering system must be in good operating condition for safe boat operation.
  • Page 127: Stopping

    3-13 Maneuvering Techniques Steering response depends on three factors: engine position, motion and throttle. STERN Like an automobile, high speed CIRCLE CIRCLE maneuvering is relatively easy and takes little practice to learn. Slow speed maneuvering, on the other hand, is far more difficult and requires time and practice to master.
  • Page 128: Docking

    3-14 Docking Docking procedures for the new boat owner usually bring surprising results. Remember, operate your boat at slow speeds to avoid accidents and practice docking to gain experience and confidence. Once away from the dock, practice docking in open water with an imaginary dock. Pull up to the dock at a slow rate of speed.
  • Page 129: High-Speed Operation

    3-15 Before tying up the boat, be sure to use enough fenders to protect the boat from damage. If possible, tie up with the bow toward the waves with a good-quality, double-braided nylon line. Tie up only to the lifting or tie-down eyes; never use the handrails or windshield frames.
  • Page 130 3-16 A moderate ability to swim is advisable for waterskiers, but swimming ability is no substitute for a well-fitting life jacket. The wearing of a life jacket or personal flotation device (PFD) is essential even for expert swimmers. The jacket should be Type III, approved by the U.S. Coast Guard and designated as a ski jacket.
  • Page 131: Towing Another Boat

    3-17 Towing Another Boat Towing is normally a last resort because damage can be created by stress from the towing lines or uncontrollability of the boat being towed. Only when ideal conditions arise — lake is calm, the disabled boat is smaller than yours, and both boat operators know correct technique —...
  • Page 132: Propellers

    3-18 Propellers • A propeller can be very sharp. Be careful when you handle it. Wear a pair of protective gloves when handling any propeller. • Remove your key from the ignition to prevent accidental starting of the engine. • DO NOT reuse the nylon locknut or the cotter pin. •...
  • Page 133: Malibu Exclusive Adjustable Rudder System

    Malibu factory at the time of manufacturing. However, it may be necessary from time to time to adjust the steering due to normal operations. Malibu Boats’ unique adjustment feature allows custom calibration to your specific driving needs. The Malibu Adjustable Rudder system allows you to increase or decrease the amount of load that is typically on the steering system.
  • Page 134: Corrosion Protection

    3-20 Make sure the set-screws are tightened after each adjustment. Failure to tighten the set-screws could cause erratic steering and serious damage could result. If you are unsure of the correct procedure to conduct this adjustment, it is recommended that you return your boat to your local Malibu Boat dealership for assistance.
  • Page 135: Care And Maintenance

    If this should occur, it is recommended that you contact Final Finish/MSG to get assistance in cleaning. Upholstery finish stains caused by secondary sources are not covered under your Malibu Boats Warranty.
  • Page 136 It is important to keep your vinyl clean at all times. Some substances can stain the vinyl if you leave them on for even a short period. Remove any contaminant and clean the area immediately. Some household cleaners, powdered abrasives, steel wool, industrial cleaners, dry cleaning fluids and lacquer solvents can damage and discolor.
  • Page 137: Exterior

    The fiberglass hull and deck of your Malibu boat consist of a molded shell and exterior gelcoat. The gelcoat protects the fiberglass shell and gives all Malibu boats a smooth and shiny surface. The following are some general instructions which will help you maintain your boat’s sleek appearance:...
  • Page 138 Surface Stains Stains can appear as a result of dust, road tar, plant sap, rust from metal fittings and other materials coming in contact with your boat’s exterior. Listed below is a step-by-step procedure to remove stains from your boat: 1) Wash area with dish washing soap 2) Apply a mild cleanser on a small area (3 x 3 ft) 3) Rinse with fresh water...
  • Page 139: Engine/Drive Train

    Damaged caused from loosened coupler bolts and improper engine alignment is not covered under your Malibu Boats warranty, and should be part of the owner’s service responsibilities to ensure system is correct. See Malibu Boats and Indmar Owner’s Manuals for appropriate timelines for...
  • Page 140: Fuel System

    Fuel System Fuel System All Malibu Boats are equipped with Pump-in-tank (PIT) fuel systems. This means the fuel pump is no longer mounted on the engine and is now located in the fuel tank. There are many benefits to using Pump-in-Tank; most notably is the prevention of vapor lock and improved filtration of contaminants.
  • Page 141 Green Fuel System The only maintenance required for the new Attwood fuel system is that all hose connections be inspected annually for tightness. Figure 4-2. P-Trap and Deck Fill Figure 4-3. FLVV Figure 4-4. GRV Figure 4-5. ICV Figure 4-6. Attwood Carbon Canister Replacement Fuel System Components Should any part of the fuel system become damaged, it is required that the correct replacement Attwood part be used.
  • Page 142: Electrical

    Boat Alarms Malibu boats are equipped with sensors that constantly monitor various functions of the boat. Certain functions, if outside of pre-determined operating parameters, may activate an alarm located under the dash. Both the engine Electronic Control Module (ECM) and the dash gauge computer may activate the alarm.
  • Page 143: Go Home Feature

    Go Home Feature The “Go Home” feature will enable the navigation lights (bow and tower) to illuminate whenever the driver uses the hard-key to start the engine instead of the touch screen. Battery A minimum of 650 cold cranking amps is the recommended battery size. TERMINAL VENT CAP Do not connect...
  • Page 144 4-10 #2 on a Dual Battery System: With a battery selector switch commonly called a “battery isolator switch”; both the house and the cranking circuits are always connected together at the selector switch. You have the ability to switch between 1-2 or all of the batteries to connect to the house and starter circuits.
  • Page 145 4-11 Now that we have separated the house and cranking circuits, we can use batteries designed for specific uses. You always need a cranking battery for the cranking circuit, but now you can use a deep cycle battery on the house circuit. Deep cycle batteries will handle the load and discharge cycles much better then cranking batteries on the house circuit.
  • Page 146: Miscellaneous

    4-12 12-V DC Accessory Outlets All models are equipped with two 12-V DC Accessory Outlets; one on the electrical panel below the dash, and one in the glove box. These outlets provide power from your boat battery to accessory equipment such as cellular phones, video cameras, marine spot lights, etc.
  • Page 147 4-13 • Clean the bilge area thoroughly and operate the bilge pump to remove any water from bilge lines. • Remove all seat cushions and open all storage areas. Store the seat cushions in a cool and dry place. • Cover the boat and store it in a garage or other protected facility.
  • Page 148 4-14 • Remove propeller assembly, and store in safe place. • If your boat is equipped with an optional heater or hot-water shower, remove both hoses and blow through hose to remove excess water. • Cover the boat with cover, tarp or, if available, shrink-wrap tarp. Also, due to the excess weight that can occur from rain and snow for boats that are stored outside, it is suggested that you make a support of 2 inch PVC piping that can be mounted under the covering material.
  • Page 149: Troubleshooting

    4-15 Troubleshooting The following charts will assist you in finding and correcting minor mechanical and electrical problems with your boat. Problems are listed in the order of the most likely event to the least likely. To correct a problem, first determine what the problem is. Start with the first cause and eliminate the possibility of each until the problem is corrected.
  • Page 150 4-16 PROBLEM POSSIBLE CAUSE SOLUTION Engine will not turn • Throttle control in gear. • Shift into neutral. over • Main circuit breaker open. • Reset circuit breaker. Engine turns over, but • No fuel in tanks. • Fill fuel tank. will not start •...
  • Page 151 4-17 PROBLEM POSSIBLE CAUSE SOLUTION Throttle/shifting • Corroded cables. • Clean and lubricate cables. problems • Defective throttle return • Replace the throttle return spring. spring. • Low transmission oil level. • Replenish the transmission fluid. • Sticking transmission • Clean and lubricate detent shift detent ball.
  • Page 152: Glossary

    FibECS II: An engine mounting method, using fiberglass instead of other materials such as aluminum or steel; patented by Malibu Boats LLC. that provides major reduction in noise and vibration. FIBERGLASS: Fibers similar to wool or cotton, but made from fibrous glass.
  • Page 153: Index

    Wedge ......2-89 Malibu Boats Limited Warranty ..W-1 Malibu Exclusive Adjustable Rudder System .
  • Page 154 4-20...
  • Page 155 Thank you for choosing to purchase a Malibu Boats, LLC (“Malibu Boats”) product. Malibu Boats is committed to assuring your satisfaction with your new boat. Malibu Boats will provide for repairs to your boat during the applicable warranty periods in accordance with the following terms, conditions and limitations.
  • Page 156 (a) the date the boat was purchased by the first retail purchaser through an authorized Malibu Boats sales facility, or (b) the date the boat was first put into service as a demonstrator or otherwise, and qualify for and complete a warranty transfer as explained below, are provided coverage under the Malibu Boats Limited Warranty.*...
  • Page 157 Malibu Boats Limited Warranty beyond that which were available to the boat’s original owner. Malibu Boats retains the right to deny warranty transfers to boats that are damaged or have been abused.
  • Page 158 Repairs will be warranted only for the remainder of the original warranty period. In addition to Malibu Boats Limited Warranty, your boat also comes with other limited warranties provided by the engine and trailer manufacturers, among other items. Please refer to their limited warranty disclosures for details, including their terms, conditions and limitations.
  • Page 159 Such distortions and imperfections are considered normal. • Damages caused by the use of any trailer not sold through Malibu Boats • Damages caused by improper support of the boat on davits, hoist system or boat lift of any kind •...
  • Page 160 • Determination by any state or federal entity or private insurance carrier that the boat is a total loss or fit only for salvage This Malibu Boats Limited Warranty does not provide coverage to any boat which has ever been: (a) a repossession from a retail customer; (b) purchased at auction (bank auction, online auction, auction house, etc.);...
  • Page 161: Malibu Boats Limited Warranty

    You are encouraged to inspect your boat for this type of damage when you take delivery. If you find any such defects or damage you must notify the selling Malibu Boats dealer at the time of delivery to have these items covered by this limited warranty and to...
  • Page 162 Design and/or Manufacturing Changes Malibu Boats reserve the right to make changes in boats built by it at any time without incurring any obligation to make the same or similar changes on boats previously built and/or sold. Other Warranties Some materials, components or parts of the boat which are NOT covered by the Malibu Boats Limited Warranty are separately warranted by their manufacturers or suppliers.
  • Page 163 Malibu Boats 5075 Kimberly Way Loudon, TN 37774 (865) 458-5478 Malibu Boats, LLC Internet Site www.malibuboats.com THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO STATE Attwood Fuel System Two-Year Warranty and Liability Generally: All Attwood Fuel System Components are covered by a two (2) year limited warranty from the date of a Vessel’s first retail sale.
  • Page 164 W-10 Notes...

Table of Contents