Instructions For Use - Otto Bock Skeo 6Y80 Instructions For Use Manual

4 Scope of delivery
Quantity
1
1
5 Preparation for use
The following technical information is available if needed:
Skeo TT liners
Hybrid liners
Copolymer liners
Polyurethane liners
Skeo TF liners
5.1 Adapting the liner
INFORMATION
Liners with a threaded connection have an integrated matrix. The matrix
prevents excessive expansion of the material. The length of the matrix is
based on the liner's domain of application. In TF liners, the matrix runs the
entire length of the liner. In TT liners, the matrix is usually 10 cm long.
INFORMATION
Copolymer liners are thermoformable. For this purpose, pull the liner over
a dry plaster positive and optionally wrap it in an elastic bandage.
► 6Y90, 6Y92, 6Y94: convection oven, 70° C, 2 h
► 6Y93: convection oven, 65° C, 15 min
Recommended tools for liners with textile cover: 719S7 trimming
>
scissors or 719S20 scissors for synthetic fibres
Recommended tools for liners without textile cover: 756L9 trimming
>
device, 756L10 liner trimmer or conventional straight edge scissors
► NOTICE! Do not use wave edge scissors.
Cut the liner horizontally at the required length. Ensure to obtain a
smooth cutting edge to prevent the material from tearing.
5.2 Optional: attaching the pin
INFORMATION
The shape of the prosthetic socket must allow load on the end of the resid­
ual limb.
12
Designation

Instructions for use

Liner
Reference number
–
–
646T2=1.6, 646T2112
646T217
646T215
646T2=1.8
647G932