Otto Bock Skeo 6Y80 Instructions For Use Manual page 10

Copolymer (Caleo liners)
Caleo liners are made of TPE gel (a thermoplastic elastomer). They effect­
ively reduce shear forces and contribute to skin care by releasing a medical
grade mineral oil.
The plaster cast technique can be selected freely. The liner used determines
the appropriate suspension system.
Polyurethane (Uneo liners)
Uneo liners are made of a polyurethane gel. The material is viscoelastic. It
adapts very well to the form and structure of the residual limb and protects
very well against impact forces.
Ottobock recommends a total surface weight-bearing socket (the "Harmony"
principle) with a harmony system or an exhaust valve.
Hybrid
Hybrid liners consist of polyurethane gel and silicone so that properties of
both materials can be used.
Ottobock recommends a total surface weight-bearing socket (the "Harmony"
principle) with a vacuum system (for instance, the AeroLink system).
1.2 Combination possibilities
This prosthetic component is part of the Ottobock modular system and can
be combined with other products of this modular system.
2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Service Life
The product is a wear part, which means it is subject to normal wear and
tear.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
10