Otto Bock Skeo 6Y80 Instructions For Use Manual page 14

► Because of the relatively long drying times of polyurethane liners, a
spare liner is recommended.
► Clean new liners before using for the first time.
INFORMATION
Derma Prevent may damage the outer and inner coating of polyurethane
liners.
6.1 Putting on and taking off the liner
Donning
1) Check the liner for damage. If a pin is attached, also check the pin for
damage.
2) Roll up the liner and place it on the end of the residual limb.
NOTICE! Align a distal connecting element (e.g. pin, metal cap)
with the longitudinal axis of the residual limb.
3) Unroll the liner onto the residual limb so that it has no wrinkles or air
inclusions, without shifting the soft tissue.
4) Check the fit and the alignment of the liner.
INFORMATION: Do not wrap the liner over the prosthetic socket
(exception: 6Y100).
Doffing
1) Roll up the liner from the open end to the closed end and remove it from
the residual limb.
2) Recommendation: clean the liner according to the "Cleaning and care"
section.
6.2 Cleaning and Care
NOTICE
Use of improper cleaning agents
Damage to the product due to use of improper cleaning agents
► Only clean the product with the approved cleaning agents.
INFORMATION
Clean the liner and skin more frequently in case of increased perspiration.
Wearing a liner requires daily intensive skin care. Ottobock recommends
the use of the Derma skin care system.
1) Turn the liner inside out.
14