Otto Bock Skeo 6Y80 Instructions For Use Manual page 13

The pin to connect the liner to the shuttle lock is screwed into the thread at
the distal end of the liner.
Required tools and materials:
>
Torque wrench (adjustable to 3 Nm), 636K13 Loctite
1) Apply Loctite
2) NOTICE! Do not shorten flexible pins and pins with exhaust valve.
Screw the pin into the thread and tighten it (installation torque: 3 Nm).
6 Use
CAUTION
Use of powder (e.g. baby powder or talcum)
Skin irritation on the residual limb and loss of function of prosthetic com­
ponents due to clogging with particles or deprivation of lubricant
► Keep the product away from powders.
NOTICE
Mechanical overload
Impaired functionality due to mechanical damage
► Check the product for damage prior to each use.
► Do not use the product if its functionality has been impaired.
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
INFORMATION
Some liners are treated with the Skinguard Technology additive. Skinguard
Technology has an antibacterial effect and prevents the formation of
unpleasant odours.
Substances in sweat containing sulphur may cause discolouration. This
discolouration has no effect on the function or durability of the liner but
cannot be removed. Sulphur may enter sweat through food, for
example, protein products, cabbage, nuts, legumes and sulphured
products (e.g. dried fruit).
Discolouration of the liner does not justify customer complaint claims.
INFORMATION
► Liners that have already been worn generally feel softer than new
liners.
®
to the thread.
®
13