Settings List; Control Tool - IAI WA-1000D-CL User Manual

Settings List

For details on the ASCII Command List, visit the product page (WA-1000D-CL) on our website.

Control Tool

: Settings that can only be configured when image capture on the camera is stopped.
Item
a) Device Control
Device Vendor Name
Device Model Name
Device Manufacturer Info
Device SFNC Version Major
Device SFNC Version Minor
Device SFNC Version Sub
Minor
Device Version
Device Firmware Version
Device Manifest XML Major
Version
Device Manifest XML Minor
Version
Device Manifest XML Sub
Minor Version
Device ID
Device User ID
Device Scan Type
Device Temperature Selector
Device Temperature 1
Device Temperature 2
Device Reset
b) Image Format Control
Pixel Format
Test Pattern
c) Acquisition Control
Trigger Selector
Trigger Mode
Trigger Source
Trigger Activation
Acquisition Line Rate
Exposure Mode
Exposure Time
d) Analog Control
Black Level Selector
Black Level
Gain Selector
Setting range
—
—
—
—
—
—
—
—
—
—
—
—
Any
Linescan
Sensor
—
—
—
Mono8
Mono10
Mono12
Off,
GreyHorizontalRamp,
Grayscale2,
White
Line Start
Off, On
CC1,
Line4
Rising Edge,
Falling Edge
500.0 to 39235.29411
Off,
Timed,
Trigger Width
20.3898 to 1994.90205
All
–133 to 255
Analog All
̶ 37 ̶
Default value
Display/configure information related to
the device.
"JAI Ltd., Japan" Display the manufacturer name.
WA-1000D-CL Display the model name.
— Display the manufacturer information.
2 Display the SFNC version.
0
0
— Display the device version.
— Display the firmware version.
— Display the XML version.
—
—
— Display the device ID.
— Set the user ID for the camera.
Linescan Display the scan type of the camera.
Sensor Display the location of the temperature
sensor inside the camera.
— Display the internal temperature (°C) of
the camera.
—
— Reset the device.
Configure image format settings.
Mono10 Set the pixel format.
Off Select the test image.
Configure image acquisition settings.
Line Start Select the trigger operation.
Off Select the trigger mode.
CC1 Select the trigger signal source.
Rising Edge Select the polarity of the trigger signal
(rising edge of (i.e., location of signal at which trigger is
input signal) applied).
39235.3 Set the line rate as a frequency. (unit: Hz)
Timed (control Select the exposure mode.
via exposure
time)
20.3898 Set the exposure time.
The maximum value when [Trigger Mode]
is set to [Off] varies depending on the
[Acquisition Frame Rate Raw] value.
Configure analog control settings.
All Select the black level to configure.
0 Set the black level value.
Analog All Select the gain to configure.
WA-1000D-CL
Description