IAI WA-1000D-CL User Manual page 12

WA-1000D-CL
v Clear the [JAI GigE Vision Filter Driver] checkbox, and save.
3
Verify the settings for using Camera Link.
The GO-1000D-CL supports GenIcam and Gen-CP. Check the following settings when controlling
the camera via JAI SDK.
Checking the frame grabber board's settings
Settings must be configured on the frame grabber board to enable Gen-CP support.
For details, refer to the operating instructions for each board.
Checking JAI SDK's settings
u Start JAI Control Tool, and click the (Settings) icon at the top right.
̶ 12 ̶