IAI WA-1000D-CL User Manual page 39

Swir ingaas line scan camera
Table of Contents

Advertisement

Item
Device TG Mode
CL Type
CL Cable Select
Gain Mode
Auto Channel Balance Gain
Auto Channel Balance Shutter
Aberration Enable
Aberration Select
Aberration Name
Aberration Left Side Pixel
Aberration Area Number
Aberration Area 2nd Pixel
Aberration Area 3rd Pixel
CL Cable Setting Short
CL Cable Setting Middle
CL Cable Setting Long
Setting range
Sync,
Async
2 Channel,
Dual Base
Short,
Middle,
Long
Master,
Individual
Off, On
Lens1,
Lens2,
Lens3
Any
-3 to 3
1 to 8
1 to 7
1 to 6
0 to 255
0 to 255
0 to 255
̶ 39 ̶
Default value
Sync
Select whether to operate with Channel 1
and Channel 2 synced or unsynced.
[Sync]: Synchronize Channel 1 and
Channel 2.
[Async]: Operate with Channel 1 and
Channel 2 unsynchronized.
2 Channel
Select the camera link output type.
[2 Channel]: Output two channels to one
connector according to the RGB
output settings.
[Dual Base]: Output Channel 1 and
Channel 2 to separate connectors.
Short
Set preemphasis to match the camera
link cable length.
Individual
Set the gain configuration method.
[Master]: Configure the gain settings for
Channel 2 to match those of
Channel 1.
[Individual]: Configure gain settings for
Channel 1 and Channel 2 separately.
Correct the gain difference between
Channel 1 and Channel 2 according to
the output of Channel 1.
Correct the exposure time difference
between Channel 1 and Channel 2
according to the output of Channel 1.
Off
Select whether to enable aberration
correction for Channel 2 according to
Channel 1.
Lens1
Select the lens data to use for aberration
correction.
Set a name for the aberration correction.
3
Set the parameters for aberration
correction.
6
Set the parameters for aberration
correction.
2
Set the parameters for aberration
correction.
2
Set the parameters for aberration
correction.
80
Set the preemphasis level for when [CL
Cable Select] is set to [Short].
120
Set the preemphasis level for when [CL
Cable Select] is set to [Middle].
160
Set the preemphasis level for when [CL
Cable Select] is set to [Long].
WA-1000D-CL
Description

Advertisement

Table of Contents
loading

Table of Contents