Table of Contents
Advertisement
Features
The WA-1000D-CL is a dual-band line scan camera that uses a prism and a combination of bandpass
filters to divide incoming light by wavelength and direct it to two separate InGaAs linear image sensors.
Wavelengths captured are in the NIR and SWIR spectral ranges spanning from approximately 900 nm
to 1700 nm and are output in two video channels (ch1/ch2) via the Camera Link interface.
See "Spectral Response" (page 46) for a description of the wavelengths output by each channel.
™ The M52 mount meets the recommended machine vision lens guidelines for large sensor mounts as
established by the Japan Industrial Imaging Association in cooperation with AIA and EMVA (JIIA LER-004-2010
mechanical interface recommendations by image size).
Camera Link compatible interface
• Video outputs can be used as trigger inputs.
• The video output can be switched between a dual-base configuration and a 2-ch configuration.
Output formats
You can choose from 8-bit, 10-bit, and 12-bit output.
Variety of pre-process functions
• LUT (Lookup Table)
Programmable control over gamma and contrast is possible.
• Gamma correction
Gamma can be set to 0.45 or 1.0 (off).
• Shading correction (flat field)
Non-uniformity (i.e., shading) in the amount of light generated by the lens and lighting equipment can
be corrected.
• Variable line rate
By varying the line rate, the scanning speed of the camera can be matched to the feeding speed of
the object, and the accumulation time can be lengthened to increase sensitivity.
Connection example:
AC adapter
External trigger
Frame grabber
board
Camera
̶ 6 ̶
WA-1000D-CL
Computer
Advertisement
Table of Contents
