Table of Contents
Advertisement
Item
Gain
Gain Raw
Analog Base Gain
e) LUT Control
LUT Mode
Gamma
LUT Selector
LUT Index
LUT Value
f) User Set Control
User Set Selector
User Set Load
User Set Save
g) JAI Custom Control
Image Format Control Selector
Acquisition Control Selector
Analog Control Selector
LUT Control Selector
JAI Custom Control Selector
Auto Line Rate Reference
Auto Line Rate
Blemish Correct
Blemish Threshold
Blemish Detect
Blemish Index
Blemish Position
Pixel Black Correct
Pixel Black Detect
Pixel Gain Correct
Pixel Gain Detect
Shading Correct
Shading Detect
Sens Out Cfa
Sens Out Cfb
Sens Out Cfc
Noise reduction
Setting range
1 to 3.572
0 to 308
0 to 3
Off, Gamma, LUT
0.45 to 1.0
Luminance
0 to 255
0 to 4095
0: Default,
User Set1 to User Set3
—
—
Sensor1,
Sensor2
Sensor1,
Sensor2
Sensor1,
Sensor2
Sensor1,
Sensor2
Sensor1,
Sensor2
0 to 1023
—
Off, On
0 to 100
—
0 to 8
0 to 1024
Off,
Factory,
User
—
Off,
Factory,
User
—
Off,
Factory,
User
—
0, 1
0, 1
0, 1
Off, On
̶ 38 ̶
Default value
1
Set the gain value by multipliers for the
gain setting selected in [Gain Selector].
0
Set the gain value for the gain setting
selected in [Gain Selector].
2
Set the analog coarse gain.
Configure LUT settings.
Off
Select the JAI LUT mode.
1.0
Set the gamma value.
Luminance
Display the LUT data type.
0
Set the LUT index table number.
0
Set the LUT value.
Configure user settings.
Default (factory
Select the user settings.
default values)
—
Load user settings.
—
Save the current setting values as user
settings.
Configure JAI proprietary function
settings.
Sensor1
Select the sensor channel to be
configured with [Image Format Control].
Sensor1
Select the sensor channel to be
configured with [Acquisition Control].
Sensor1
Select the sensor channel to be
configured with [Analog Control].
Sensor1
Select the sensor channel to be
configured with [LUT Control].
Sensor1
Select the sensor channel to be
configured with [JAI Custom Control].
500
Set the reference value used when
performing automatic level control using
line periods.
—
Adjust the line rate to achieve the
brightness of the reference value.
This functions only when [Exposure
Mode] is set to [Off].
Off
Select whether to enable blemish
correction.
1
Set the blemish detection threshold.
—
Execute blemish detection.
—
Set the blemish data table. Up to 8
blemish pixels can be corrected.
Blemishes at the left and right edges
cannot be corrected.
—
Set the blemish position.
Factory
Select whether to enable pixel offset
correction.
—
Calculate the correction data for pixel
offset correction.
Off
Select whether to enable pixel gain
correction.
—
Calculate the correction data for pixel
gain correction.
Off
Select whether to enable shading
correction.
—
Calculate the correction data for shading
correction.
1
Set the sensor's internal conversion gain.
1
Set the sensor's internal conversion gain.
0
Set the sensor's internal conversion gain.
Off
Select whether to enable noise reduction.
WA-1000D-CL
Description
Advertisement
Table of Contents
