Usage Precautions - IAI WA-1000D-CL User Manual

Notes on cable configurations
The presence of lighting equipment and television receivers nearby may result in video and audio
noise. In such cases, change the cable configurations or placement.
Notes on attaching the lens
Avoiding dust particles
When attaching the lens to the camera, stray dust and other particles may adhere to the sensor
surface and rear surface of the lens. Be careful of the following when attaching the lens.
• Work in a clean environment.
• Do not remove the caps from the camera and lens until immediately before you attach the lens.
• To prevent dust from adhering to surfaces, point the camera and lens downward and do not allow the
lens surface to come into contact with your hands or other objects.
• Always use a blower brush to remove any dust that adheres.
Never use your hands or cloth, blow with your mouth, or use other methods to remove dust.
Phenomena specific to InGaAs image sensors
The following phenomena are known to occur on cameras equipped with InGaAs linear image sensors.
These do not indicate malfunctions.
Blooming
•
When the camera is pointed at scenes containing very bright areas or strong light sources, some
pixels on the InGaAs linear image sensor may accumulate more than the maximum charge allowed,
causing the excess charge to overflow into the surrounding pixels. While this "blooming" affects
image quality, it does not affect the operation of the camera.
Notes on exportation
When exporting this product, please follow the export regulations of your country or region.

Usage Precautions

̶ 5 ̶
WA-1000D-CL