RS-232C Command Control
The basic control parameters are as follows.
Item
Scanning
Electronic Shutter
Gain
Black
Trigger
Miscellaneous
For details, refer to the JAI WA-1000D-CL Communication Protocols.
Field Upgrade Function
You can update the timing controller and firmware using the dedicated update tool via Camera Link
serial communication.
Serial communication via the DC IN / trigger IN connector (12-pin round) is not supported for this function.
Control parameter
Independent scanning for all pixels, binning
Accumulation time
Ch1, ch2
Ch1, ch2
Mode, trigger polarity selection
Camera Link: 8- ⇔ 10-bit switching
Test pattern: ON ⇔ OFF
̶ 36 ̶
WA-1000D-CL