Appendix A: Emr3 Safety Instructions - Veeder-Root EMR3 Installation Manual

Appendix A: EMR
1. ATEX approved EMR
product should not be installed or used in hazardous locations that are not compatible with the following:
EEx ia II A T4
Ui: 13.365 Vdc
Ii: 687 mA
Pi: 2.3 W
Li: 208 H
μ
Ci: 13.3 F
μ
T -25°C to +70°C
amb
Defined per certification CE
2. Refer to the site preparation procedures in this manual for general instructions on safe installation, use, and
replacement.
3
3. The EMR system does require periodic calibration. Follow the calibration procedures outlined in the Veeder-
3
Root EMR Setup and Operation manual (P/N 577013-766).
3
4. The EMR system is not serviceable. If a failure occurs, the unit should be replaced in accordance with the
requirements of this manual.
3
Safety Instructions
3
systems are marked with the following information defining its limits for safe use. The
II 1G DEMKO SYST 02 ATEX 0216184 EEx ia IIA T4
600
A-1