Veeder-Root EMR3 XStream-PKG Installation Instructions Manual

INTRODUCTION
This Installation Guide Contains the necessary information to Connect the XStream Wireless Modems to
the EMR³ Interconnect Box and the Office Computer for running the EMR³ Datalink Program. For
Specific Instructions on Running the Program itself, Refer to the Program Manual that is included on the
Software Disk and the Quick Start Guide that is included with the Office Kit.
DESCRIPTION:
The Wireless Kits come in three types:
Kit Number Description
0846000-034 Office Kit - XStream 2.4 GHZ –
Europe and Other
0846000-035 Truck Kit with Keypad -
XStream 2.4 GHZ – Europe
and Other
Truck Kit - XStream 2.4 GHZ –
0846000-036 Europe and Other
INDIVIDUAL MODEM UNIQUE ADDRESS - IMPORTANT
Each Serial Modem has a Unique Address assigned by Veeder-Root. This number is on the
label on the Modem Itself, and on the Modem Box.
number is your traceability from the Specific Truck to the Office Software. The Truck Modem
number will be entered into the Office Software and identified with the specific Truck Number (or
other local identification).
XSTREAM 2.4 GHZ WIRELESS MODEM
For use with VEEDER-ROOT EMR³ DATALINK
INSTALLATION INSTRUCTIONS
Manual 577013-894, Rev. B
General Contents and Comments
The office kit includes:
•
Wireless USB modem with standard
antenna,
•
Regular USB Cable for connecting the
modem to the office PC,
•
Quick Start Guide,
•
Installation Guide
•
Program Disc. The Program Disc includes
the USB Drivers and the full Program
Manual as a .pdf file.
The Truck Kit with Keypad includes:
•
Wireless modem with standard antenna,
•
Special RS-232 Cable for Connecting to
Interconnect Box
•
Cord grip and Velcro patch
•
Installation Guide
•
Optional Keypad for EMR³ Register Head
The Truck Kit without Keypad includes:
•
Wireless modem with standard antenna,
•
Special RS-232 Cable for Connecting to
Interconnect Box
•
Cord grip and Velcro patch
•
Installation Guide
For each Truck / Interconnect Box, this
Page 1 of 14