Installing The Projector Lens - Christie Mirage 4K40-RGB Installation And Setup Manual

The projector feet are removable and can be moved to the top of the projector to run in an
inverted orientation.
2. Once the required adjustment is made, using a wrench, tighten the lock nut against the
bottom of the projector.

Installing the projector lens

Only use lenses designed for Mirage 4K40-RGB projectors. Installing a lens not designed for Mirage
4K40-RGB, results in a warning that the lens is not present.
1. Remove the lens caps from the lens.
The packaging tape is required to ensure safe shipment of the projection lens to restrain the
zoom ring from rotating during shipping.
2. Align the guides on the front cover and the lens marked by a red line.
Mirage 4K40-RGB Installation and Setup Guide
020-103014-03 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
22