4. Select Enter.
5. Select the QSFP+ option as the input setting.
a) From the side panel home page, select Input.
b) On the Input selection page, select the appropriate input marked Christie Link.
More than one input source may be listed as Christie Link, depending on how many
signals are being sent from Christie Link.
Related information
Turning on the projector (on page 25)
Mirage 4K40-RGB Installation and Setup Guide
020-103014-03 Rev. 1 (08-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
37