3. Open the shutter.
4. From the Test Pattern menu, select the Boresight test pattern.
The Boresight test pattern assists with adjusting the boresight for the three focus points.
5. To focus the bottom boresight guide, adjust the blue boresight screw.
Adjust the screw 1/4 inch. If you get to the end, further unlock the corresponding stabilization
screw.
Mirage 4K40-RGB Installation and Setup Guide
020-103014-03 Rev. 1 (08-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
29