Connecting A Video Source Using Hdmi - Christie Mirage 4K40-RGB Installation And Setup Manual

Input configuration
Four-Port
Four-Port Dual-Input 3D
Two-Port
Two-Port Dual Input 3D
One-Port
One-Port, Dual-Input 3D
This card may or may not be included with your model. Standard inputs are subject to change. Refer
to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details.
Related information
TDPIC video formats for Mirage projectors (on page 52)
Dual-input 3D for Mirage projectors (on page 55)

Connecting a video source using HDMI

The Twin HDMI input card (THIC) accepts digital video data from HDMI sources.
Part number: 108-311101-XX
The input configurations listed below are supported.
Input configuration
Four-Port
Mirage 4K40-RGB Installation and Setup Guide
020-103014-03 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices and establishing communication
Description
Enables connection of four DisplayPort cables to two or
four TDPIC cards or one QDPIC card. Each DisplayPort
input supplies one quadrant or column of a 4K input
image. This configuration supports high resolution and
high frame rate input video streams.
May be used for Dual-Input 3D configurations.
Enables connection of two DisplayPort cables to two
TDPIC cards or one QDPIC card. Each DisplayPort input
supplies one of two columns of a 4K input image.
May be used for Dual-Input 3D configurations.
Enables connection of one DisplayPort cable to a TDPIC
card or one QDPIC card. In this configuration the
DisplayPort input supplies the entire video raster.
May be used for Dual-Input 3D configurations.
Description
Enables connection of four HDMI cables to two THIC cards.
Each HDMI input supplies one quadrant or column of a 4K
Requirements
Two or four TDPIC cards or
one QDPIC card
Four TDPIC cards
Two TDPIC cards or one
QDPIC card
Four TDPIC cards
One TDPIC card or one
QDPIC card
One TDPIC card
Requirements
Two THIC cards
41