•
Fiber optic support
•
Laser illumination source interlock jumper for J33 harness (P/N: 001-114198-XX)
•
Fiber connector safety cover
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
website. Read all instructions before using or servicing this product.
Mirage 4K40-RGB
1. Access the documentation from the Christie website:
•
Go to this URL: bit.ly/2C6H4HZ or.
https://www.christiedigital.com/en-us/business/products/projectors/3-chip-dlp/3d-
projectors.
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on this product is available in the following documents.
•
4K40-RGB Product Safety Guide (P/N: 020-102957-XX)
•
Mirage 4K40-RGB User Guide (P/N: 020-103015-XX)
•
Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX)
•
Mirage 4K40-RGB Status System Guide (P/N: 020-103030-XX)
•
Mirage 4K40-RGB Serial Commands Guide (P/N: 020-103028-XX)
•
4K40-RGB Service Guide (P/N: 020-102960-XX)
Technical support
Technical support for Christie products is available at:
•
North and South America: +1-800-221-8025 or Support.Americas@christiedigital.com
•
Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com
•
Asia Pacific: +65 6877-8737 or Support.APAC@christiedigital.com
Mirage 4K40-RGB Installation and Setup Guide
020-103014-03 Rev. 1 (08-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Introduction
15