Installing Hot-Plug Pci Boards - Fujitsu PRIMERGY RX600 S3 SAS Operating Manual

Hot-plug PCI boards
8.5.3

Installing hot-plug PCI boards

Insert the PCI board into the removal aid
Figure 36: Inserting a new PCI board into the removal aid
Ê Insert the new PCI board into the groove (b) provided in the removal aid (1).
I
This step can be skipped in the case of short boards and low-profile
boards.
Ê Insert a green fastening clip into the track, and push it down until it snaps into
place on the top edge of the PCI board.
98 Operating manual
Hot plug components
RX600 S3 SAS