Connecting Devices To The Server - Fujitsu PRIMERGY RX600 S3 SAS Operating Manual

Connecting devices to the server

4.4 Connecting devices to the server
The ports for external devices are on the front and rear of the server. The
additional ports available on your server depend on the PCI boards installed and
other options (for example , an optional SCSI port).
I
Some of the devices that can be connected may require special software,
such as drivers (see the documentation for the connected device).
A VGA port and three USB ports are located on the front of the server (see
figure 8).
VGA
Figure 8: Ports on the front
I
Only one of the two VGA ports on the front and rear (see figure
page 47) can be used at any one time. The empty port is automatically
deactivated.
46
USB
Operating manual
Hardware installation
9 on
RX600 S3 SAS