Replacing Hot-Plug Fan Units - Fujitsu PRIMERGY RX600 S3 SAS Operating Manual

Hot plug components
8.2

Replacing hot-plug fan units

The system has two pairs of redundant system fans (2+2). Each pair of fans is
contained in a fan unit, which can be accessed on the front of the server.
If a system fan fails, this is indicated by the Global Error indicator on the front of
the server and by the indicator on the relevant fan unit (both LEDs light up
orange, see "Indicators on the control panel" on page 53
hot-plug fan units" on page
1
2
Figure 22: Unlock the fan unit on the left and slide it out
Ê Lightly press the green button (1).
The handle (2) is unlocked.
Use the handle to pull the faulty fan unit towards you.
RX600 S3 SAS
59).
Operating manual
Replacing hot-plug fan units
and "Indicator on the
3
79