Configuration With Serverstart - Fujitsu PRIMERGY RX600 S3 SAS Operating Manual

Configuring the server
5.3.2

Configuration with ServerStart

The ServerStart Disk 1 provided helps you configure the server and install the
operating system easily and efficiently. The menu-assisted configuration
includes the server configuration with SCU and the RAID Controller configu-
ration with ServerViewRAID.
Benefits of using ServerStart
– Automatic configuration of your server hardware and disk arrays.
– Installation assistance for all leading server operating systems.
– Creation of configuration files for unattended installation of several
PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I
The software that can be installed depends on your server's hardware
configuration, which is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
To find out how to use ServerStart and for more information, refer to the relevant
manual (see "Literature" on page
If you are using ServerStart , you can skip the following section, which explains
how to configure the server and install the operating system. Continue from
section "Cleaning the server" on page
66
109).
68.
Operating manual
Startup and operation
RX600 S3 SAS