Id Indicator And Id Button - Fujitsu PRIMERGY RX600 S3 SAS Operating Manual

Startup and operation
5.1.2.2

ID indicator and ID button

1
2
Figure 19: ID indicator and ID button (on the right of the rear)
1 ID indicator (blue)
Lights up blue when the system has been selected by pressing the ID
button (2). To deactivate, press the button again.
The ID indicator can also be activated via ServerView and its status
reported to ServerView.
2 ID button
Lights up synchronously on the front and rear of the server when the ID
button is pressed.
RX600 S3 SAS
Operating manual
Controls and displays
61