Table of Contents
Advertisement
Configuring the Server
5.3.2
Configuration with ServerStart
With the ServerStart-CD provided, you can configure the server and install the
operating system in a convenient manner. The menu-guided configuration
includes the server configuration with the SCU and the RAID controller configu-
ration with GAM (Global Array Manager).
The ServerStart Advantages
– Automatic configuration of your server's hardware and disk arrays.
– Installation assistance for all leading server operating systems.
– Creation of configuration files for unattended installation of several
PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I
The software that can be installed depends on your server's hardware
configuration. This configuration is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
To find out how to operate ServerStart and for further information, refer to the
corresponding ServerStart manual (see "Related publications" on page 103).
If you use ServerStart, you can skip the following section on how to configure the
server and install the operating system. Continue with section "Cleaning the
Server" on page 62.
60
Commissioning and Operation
A3C40069794
Advertisement
Table of Contents
