Configuring The Server; Configuration With Serverstart - Fujitsu PRIMERGY TX150 S5 Operating Manual

Starting Up and Operation
5.4

Configuring the Server

This section contains information about configuring the server and installing the
operating system.
I
Make sure that the power saving functions are disabled in the Power
menu of the BIOS Setup during operation.
5.4.1

Configuration with ServerStart

Configuring IME (RAID Level 1)
The server has an onboard SAS controller with "Integrated Mirroring Enhanced"
functionality. Configure IME before you begin with ServerStart.
I
A separate utility is available to the controller for IME configuration. For
further information, refer to the "Integrated RAID for SAS User's Guide"
on the ServerBooks CD (select "Controllers" from the menu).
The ServerStart CD supplied allows you to conveniently configure the server and
install the operating system. The menu-guided configuration includes the server
configuration with the SCU and the RAID controller configuration with the GAM
(Global Array Manager) or ServerView RAID.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver
diskettes.
Details of how to operate ServerStart and further information can be found in the
"PRIMERGY ServerView Suite - ServerStart" manual (see
page 103).
If you are using ServerStart, you can skip the following sections on how to
configure the server and install the operating system. Continue with
"Cleaning the Server" on page
TX150 S5
75.
Operating Manual
Configuring the Server
"Literature" on
section
73