Quick Menu - Danfoss VLT AutomationDrive FC 360 Quick Manual

Local Control Panel and Pro...

5.3 Quick Menu

The quick menu gives easy access to the most frequently
used parameters.
1. To enter the quick menu, press [Menu] until the
indicator in display is placed above Quick Menu.
▲ ▼
2.
Press [ ] [ ] to select either QM1 or QM2, then
press [OK].
▲ ▼
3.
Press [ ] [ ] to browse through the parameters
in the quick menu.
4. Press [OK] to select a parameter.
▲ ▼
5.
Press [ ] [ ] to change the value of a parameter
setting.
6. Press [OK] to accept the change.
7. To exit, press either [Back] twice (or 3 times if in
QM2 and QM3) to enter Status, or press [Menu]
once to enter main menu.
MG06A502
Quick Guide
Danfoss A/S © Rev. 06/2014 All rights reserved.
5 5
27